TurboVS
Philips 27E1N1100A/00 27" specifications and in-depth review

Philips 27E1N1100A/00 27"

Manufacturer: Philips

The Philips 27E1N1100A/00 is a 27-inch standard monitor built around an IPS panel with LED backlighting, offering wide 178-degree viewing angles both horizontally and vertically. With AMD FreeSync support and a 100Hz refresh rate, it is suited for everyday computing tasks where smooth screen output matters. The display covers 101.8% of the sRGB color space and renders up to 16.7 million colors, making it a reasonable choice for general-purpose color work.

On the connectivity side, the monitor provides one HDMI 1.4 port alongside a VGA connector and a 3.5mm audio jack, while built-in stereo speakers deliver 2x2W of audio output. It supports VESA mounting and allows tilt adjustment, though swivel and portrait-mode rotation are not available. Operating power consumption sits at 18.8W, with a standby draw of just 0.5W, and the unit weighs 4000g with overall dimensions of 617mm wide, 357mm tall, and 46mm deep.

Pros
  • Wide 178-degree viewing angles both horizontally and vertically ensure consistent image quality from most seated positions
  • sRGB coverage of 101.8% and 16.7 million colors make it well-suited for color-accurate everyday work
  • AMD FreeSync support at 100Hz helps reduce screen tearing during fast-moving content
  • Built-in stereo speakers with 2 x 2W output remove the immediate need for external audio equipment
  • VESA mount compatibility allows flexible installation on monitor arms or wall mounts
  • Standby power consumption of just 0.5W keeps idle energy draw minimal
Cons
  • Full HD 1920x1080 resolution on a 27-inch panel results in a relatively low pixel density of 81.59 ppi, which can make fine details appear less sharp
  • No DisplayPort, USB ports, or USB Type-C connectivity limits versatility for modern setups
  • HDMI is limited to version 1.4, which may restrict bandwidth in certain use cases
  • The panel lacks both anti-glare coating and a matte finish, which could cause reflections in bright environments
  • No swivel or portrait mode support reduces ergonomic flexibility
  • EU energy label of D indicates relatively lower energy efficiency compared to higher-rated displays
Who is this for?

This monitor is a practical fit for everyday office and home computing tasks, where a full HD display with broad sRGB coverage handles document work, web browsing, and casual media consumption without issue. The 100Hz refresh rate combined with AMD FreeSync also makes it a reasonable choice for light gaming where smooth motion matters more than ultra-high resolution. Users who need flexible installation options will appreciate the VESA mount support, and the built-in stereo speakers add convenience for those who prefer an uncluttered desk setup without separate audio hardware.

Who is this NOT for?

Users involved in professional photo or video editing will find this monitor limiting, as it lacks color calibration support and the 81.59 ppi pixel density on a 27-inch panel is too low for detailed, precision-driven visual work. The absence of DisplayPort, USB-C, and any USB hub functionality makes it a poor match for modern multi-device workstations that rely on versatile connectivity. Additionally, competitive gamers seeking the fastest possible response or high-resolution output will be held back by the 1080p resolution and the panel's lack of anti-glare treatment, which can be problematic in brightly lit environments.

Display:

Display type IPS, LCD, LED-backlit
response time 4 ms
screen size 27"
resolution 1920 x 1080 px
pixel density 81.59 ppi
Adaptive synchronization AMD FreeSync
has anti-glare coating ✕
refresh rate 100Hz
maximum horizontal viewing angle 178º
maximum vertical viewing angle 178º
has a matte panel ✕
has a glossy panel ✕
has a touch screen ✕

The display uses an IPS panel with LCD technology and LED backlighting, spanning a 27-inch screen at a resolution of 1920 x 1080 pixels and a pixel density of 81.59 ppi. It runs at a 100Hz refresh rate with a 4ms response time, and supports AMD FreeSync for adaptive synchronization. Both horizontal and vertical viewing angles reach 178 degrees, which is typical of IPS technology. The panel is neither matte nor glossy and does not carry an anti-glare coating, nor does it support touch input.

General info:

Type Standard
EU energy label D
supports total tilt ✓
Has a swivel stand ✕
Supports VESA mount ✓
height 357 mm
width 617 mm
thickness 46 mm
weight 4000 g
supports portrait mode ✕
volume 10132.374 cm³

This is a standard-type monitor carrying an EU energy label of D, with physical dimensions of 617mm wide, 357mm tall, and 46mm thick, and a total weight of 4000g. It supports VESA mounting and allows tilt adjustment, though it does not offer a swivel stand or portrait mode rotation. The volume of the unit comes in at 10132.374 cm³, giving a clear picture of its overall footprint.

Colors:

brightness (typical) 250 nits
supports color calibration ✕
display colors 16.7 million
contrast ratio 1300:1
Adobe RGB coverage 86.85%
sRGB coverage 101.8%

The display produces up to 16.7 million colors with a typical brightness of 250 nits and a contrast ratio of 1300:1. Color space coverage is notably broad, reaching 101.8% of sRGB and 86.85% of Adobe RGB, making it capable of rendering a wide range of hues accurately. Color calibration is not supported on this monitor.

Connectivity:

HDMI ports 1
supports Thunderbolt ✕
DisplayPort outputs 0
has a socket for a 3.5 mm audio jack ✓
has a DVI connector ✕
USB ports 0
Has USB Type-C ✕
HDMI version HDMI 1.4
supports Ethernet ✕
supports Wi-Fi ✕
has AirPlay ✕
mini DisplayPort outputs 0
has a VGA connector ✓

Connectivity on this monitor is straightforward, centering on a single HDMI 1.4 port and a VGA connector as the two available video inputs, with no DisplayPort, mini DisplayPort, DVI, or USB Type-C options present. A 3.5mm audio jack is included for headset or speaker use, while USB ports of any kind are absent. The monitor does not support Thunderbolt, Ethernet, Wi-Fi, or AirPlay, keeping its connectivity profile minimal and focused on basic wired video input.

Power:

operating power consumption 18.8W
standby power consumption 0.5W

The monitor draws 18.8W during normal operation and drops to a modest 0.5W when in standby mode, reflecting a relatively low power footprint for day-to-day use.

Features:

has PiP ✕
has stereo speakers ✓
has built-in smart TV ✕
audio output power 2 x 2W
has a remote control ✕
supports Dolby Digital ✕
supports Dolby Digital Plus ✕
has DTS Surround ✕
has an ambient light sensor ✕
has a front camera ✕

The monitor includes built-in stereo speakers with a combined output of 2 x 2W, offering basic audio without the need for external speakers. It does not support Dolby Digital, Dolby Digital Plus, or DTS Surround, and there is no remote control included. Additional features such as PiP, an ambient light sensor, a front camera, and built-in smart TV functionality are all absent from this model.

Final Verdict

The Philips 27E1N1100A/00 is a straightforward 27-inch IPS monitor that delivers where it counts for general-purpose use — broad color coverage, wide viewing angles, and AMD FreeSync at 100Hz give it enough capability to handle everyday computing and light gaming without friction. Its connectivity options and 1080p resolution on a 27-inch panel mean it is best suited for users with modest demands rather than those chasing professional-grade output or a feature-rich workstation setup. As a no-frills, functionally reliable display with built-in audio and VESA support, it represents a clear, well-defined product aimed squarely at home and office users who prioritize simplicity and ease of use over expandability.

Popular Comparisons

Philips 27E1N1100A/00 27"
Philips 27E1N1100A/00 27"
VS
Philips 241V8LAB/00 24"
Philips 241V8LAB/00 24"
Philips 27E1N1100A/00 27"
Philips 27E1N1100A/00 27"
VS
Philips 27E1N1800AE/00 27"
Philips 27E1N1800AE/00 27"