TurboVS
Philips 27E2N1510/27 27" specifications and in-depth review

Philips 27E2N1510/27 27"

Manufacturer: Philips

The Philips 27E2N1510/27 is a 27-inch standard monitor built around an IPS panel with LED backlighting, offering wide viewing angles and a 2560 x 1440 pixel resolution that delivers noticeably more detail than a typical 1080p display at the same screen size. Its matte, anti-glare coating helps reduce reflections in typical office or home environments, and the stand supports tilt, swivel, and portrait rotation, along with VESA mount compatibility for those who prefer a third-party arm.

The panel runs at a 100Hz refresh rate with a 4ms response time and supports VESA Adaptive Sync for smoother motion handling. Brightness is rated at 350 nits with a contrast ratio of 1500:1, and the display is capable of reproducing 16.7 million colors. Connectivity is handled through one HDMI 2.0 port and one DisplayPort 1.4 output, while power consumption sits at 21W during normal operation and drops to 0.5W in standby. The monitor does not include USB ports, a headphone jack, built-in speakers, or wireless connectivity of any kind.

Pros
  • The stand supports tilt, swivel, and portrait mode rotation, offering meaningful ergonomic flexibility for different workspace setups
  • VESA mount compatibility allows the monitor to be used with third-party arms or wall mounts
  • The IPS panel provides 178-degree viewing angles both horizontally and vertically, maintaining consistent image quality across a wide range of viewing positions
  • A 2560 x 1440 resolution across 27 inches results in a pixel density of 108 ppi, providing noticeably sharper detail than lower-resolution panels at the same size
  • The matte, anti-glare panel surface helps reduce reflections in well-lit environments
  • Standby power consumption is very low at 0.5W, and active power draw is rated at just 21W
Cons
  • No USB ports of any kind are included, limiting the monitor's utility as a desk hub
  • There is no 3.5 mm audio jack, making it impossible to connect headphones or speakers directly to the monitor
  • Built-in speakers are absent, so separate audio hardware is required for any sound output
  • Picture-in-Picture mode is not supported, restricting multitasking options for users managing multiple sources
  • Color calibration is not supported, which may be a limitation for users who require accurate, calibrated color output
Who is this for?

This monitor suits users who need a sharp, detailed workspace display for everyday productivity tasks such as document editing, spreadsheet work, or general desktop use, where the 2560 x 1440 resolution at 27 inches provides noticeably more screen real estate than a standard 1080p setup. The wide IPS viewing angles and matte anti-glare panel make it a practical choice for office environments with ambient lighting, and the ergonomic stand with tilt, swivel, and portrait rotation adds flexibility for users who prefer to customize their monitor position. Those who want to mount the display on a third-party arm will also find the VESA compatibility a useful option.

Who is this NOT for?

Users looking for a monitor to serve as a desktop hub with USB connectivity will find this display limiting, as it offers no USB ports, no USB Type-C, and no audio output of any kind. It is also not well suited to content creators or professionals who rely on color-accurate, calibrated output, since the monitor does not support color calibration. Additionally, users who require a more immersive or feature-rich multimedia experience will be disappointed by the absence of built-in speakers, Picture-in-Picture support, and any form of audio format compatibility.

Display:

Display type LED-backlit, LCD, IPS
response time 4 ms
screen size 27"
resolution 2560 x 1440 px
pixel density 108 ppi
Adaptive synchronization VESA Adaptive Sync
has anti-glare coating ✓
refresh rate 100Hz
maximum horizontal viewing angle 178º
maximum vertical viewing angle 178º
has a matte panel ✓
has a glossy panel ✕
has a touch screen ✕

The display is a 27-inch IPS panel with LED backlighting, delivering a 2560 x 1440 pixel resolution at a pixel density of 108 ppi. It runs at a 100Hz refresh rate with a 4ms response time and supports VESA Adaptive Sync for smoother on-screen motion. Viewing angles reach 178 degrees both horizontally and vertically, which is consistent with the wide-angle performance typical of IPS technology. The panel has a matte, anti-glare coating and does not have a glossy finish or touch screen capability.

General info:

Type Standard
supports total tilt ✓
Has a swivel stand ✓
Supports VESA mount ✓
height 358 mm
width 617 mm
thickness 33 mm
weight 3590 g
supports portrait mode ✓
maximum operating temperature 40 °C
lowest potential operating temperature 0 °C
volume 7289.238 cm³

This is a standard-type monitor measuring 617 mm wide, 358 mm tall, and 33 mm thick, with a total weight of 3590 g. The stand supports tilt, swivel, and portrait mode rotation, and the monitor is also compatible with VESA wall or arm mounts for more flexible positioning. Operating temperatures range from 0 °C to 40 °C, keeping it suitable for typical indoor environments.

Colors:

brightness (typical) 350 nits
supports color calibration ✕
display colors 16.7 million
contrast ratio 1500:1

The display offers a typical brightness of 350 nits and a contrast ratio of 1500:1, with support for 16.7 million colors. Color calibration is not supported on this monitor.

Connectivity:

HDMI ports 1
supports Thunderbolt ✕
DisplayPort outputs 1
DisplayPort version DisplayPort 1.4
has a socket for a 3.5 mm audio jack ✕
has a DVI connector ✕
USB ports 0
Has USB Type-C ✕
HDMI version HDMI 2.0
supports Ethernet ✕
supports Wi-Fi ✕
has AirPlay ✕
mini DisplayPort outputs 0
has a VGA connector ✕

Connectivity is limited to two video inputs: one HDMI 2.0 port and one DisplayPort 1.4 output. There are no USB ports of any kind, including USB Type-C, and no DVI, VGA, or mini DisplayPort connections. The monitor also lacks a 3.5 mm audio jack, and does not support Thunderbolt, Ethernet, Wi-Fi, or AirPlay.

Power:

operating power consumption 21W
standby power consumption 0.5W

The monitor draws 21W during normal operation and drops to just 0.5W in standby mode.

Features:

has PiP ✕
has stereo speakers ✕
has built-in smart TV ✕
has a remote control ✕
supports Dolby Digital ✕
supports Dolby Digital Plus ✕
has DTS Surround ✕
has an ambient light sensor ✕
has a front camera ✕

This monitor does not include built-in speakers or any audio format support, including Dolby Digital, Dolby Digital Plus, or DTS Surround. It also lacks Picture-in-Picture, a remote control, an ambient light sensor, a front camera, and smart TV functionality.

Final Verdict

The Philips 27E2N1510/27 is a straightforward 27-inch IPS monitor that delivers where it matters most for everyday productivity: a 2560 x 1440 resolution with wide viewing angles, a matte anti-glare panel, and a flexible ergonomic stand that supports tilt, swivel, portrait rotation, and VESA mounting. Its 100Hz refresh rate and VESA Adaptive Sync add a degree of smoothness that goes beyond basic office use. That said, the near-complete absence of peripheral connectivity — no USB ports, no audio output, and no color calibration support — means it functions purely as a display rather than a versatile desk hub. For users whose needs align with a clean, capable screen for focused daily work, it holds up well; those requiring broader feature support will need to look elsewhere.

Popular Comparisons

Philips 27E2N1510/27 27"
Philips 27E2N1510/27 27"
VS
Philips 27E1N1800AE/00 27"
Philips 27E1N1800AE/00 27"
Philips 27E2N1510/27 27"
Philips 27E2N1510/27 27"
VS
Philips Evnia 24M2N3200S/00 24"
Philips Evnia 24M2N3200S/00 24"