The display uses a QD-OLED panel measuring 26.5 inches with a resolution of 2560 x 1440 pixels at a pixel density of 110.84 ppi. Its 360Hz refresh rate and 0.03ms response time make it well-suited for fast-paced content, while wide viewing angles of 178 degrees both horizontally and vertically ensure consistent image quality across a broad range of positions. The panel is matte rather than glossy and includes an anti-glare coating, though it does not support touch input or any form of adaptive synchronization. Screen size and pixel density together contribute to a sharp and detailed image across the full panel area.
This is a gaming-type monitor with physical dimensions of 609.3 mm wide, 357.7 mm tall, and 61 mm thick, weighing 6000 g. The stand supports both tilt and swivel adjustments, and the monitor is compatible with VESA mounting solutions, though portrait mode is not supported. VESA mount support provides flexibility for users who prefer third-party arms or wall brackets. Its operating temperature range runs from 0 °C to 40 °C, and its total volume is approximately 13294.74 cm³.
The display renders up to 1.07 billion colors at a 10-bit color depth, supported by a contrast ratio of 1,500,000:1 that allows for a wide separation between dark and bright areas of the image. Typical brightness is rated at 250 nits, and the panel covers 147.5% of the sRGB color space alongside 118% of the Adobe RGB gamut, indicating a wide color reproduction range across both standards. Color calibration is supported, giving users the ability to fine-tune color output to their requirements.
The monitor offers a practical set of video inputs, including two HDMI 2.1 ports and one DisplayPort 1.4 output, while mini DisplayPort, DVI, and VGA connectors are absent. Four USB 3.1 ports are available for peripheral connectivity, and a 3.5mm headset jack handles audio pass-through. Wireless options are not present — the monitor does not support Wi-Fi, Ethernet, Thunderbolt, or AirPlay, positioning it as a wired-only display in terms of both video and network connectivity.
During normal operation, the monitor draws 83.7W of power, while in standby mode consumption drops significantly to just 0.5W.
The monitor includes built-in stereo speakers rated at 2 x 5W, providing basic audio output without the need for external speakers. Picture-in-Picture (PiP) is supported, allowing content from multiple sources to be displayed simultaneously on screen. The monitor does not include a remote control, front camera, or ambient light sensor, and there is no built-in smart TV functionality. On the audio side, Dolby Digital, Dolby Digital Plus, and DTS Surround are all absent, keeping the audio feature set straightforward.