TurboVS
Philips TAN1150 specifications and in-depth review

Philips TAN1150

Manufacturer: Philips

The Philips TAN1150 sits in the neckband segment of the wireless earbuds category, offering a wired-between-ears design that keeps the earpieces connected via a flexible band resting around the neck. It supports stereo playback through in-ear tips and can function as a headset for calls, backed by a single noise-canceling microphone and a mute function for added convenience during conversations.

Connectivity is handled via Bluetooth 5.3 with AAC codec support, a maximum wireless range of 10 meters, and multipoint pairing for up to two devices simultaneously. The 13 mm drivers cover a frequency range of 20 Hz to 20,000 Hz at 32 Ohms impedance, while the 200 mAh battery delivers up to 60 hours of use with a 1.5-hour charge time via USB Type-C, including fast charging support and a battery level indicator.

Pros
  • Exceptionally long battery life of 60 hours on a single charge
  • Fast charging support helps reduce downtime between uses
  • Multipoint connectivity allows simultaneous pairing with two devices
  • IPX5 water resistance makes it suitable for use in sweaty or light-rain conditions
  • USB Type-C charging port offers a widely compatible and convenient connection
  • Noise-canceling microphone helps reduce background interference during calls
Cons
  • Neckband design is less portable and more physically intrusive than fully wireless earbuds
  • No active noise cancellation limits its effectiveness in loud environments
  • Wireless range is limited to 10 meters, restricting movement from the paired device
  • No support for advanced audio codecs such as LDAC or aptX, with only AAC available
  • Single microphone setup offers less redundancy for call clarity compared to multi-mic configurations
  • No ambient sound mode means users are cut off from their surroundings while listening
Who is this for?

The TAN1150 is well suited to users who prioritize all-day battery endurance, making it a practical option for long commutes, extended work sessions, or travel where frequent recharging is inconvenient. Its IPX5 water resistance and neckband form factor make it a reasonable fit for light exercise or outdoor use where a secure, stable fit matters more than a fully wireless setup. Those who frequently take calls will also find value in the noise-canceling microphone and mute function, along with multipoint pairing that allows switching between two devices without manual reconnection.

Who is this NOT for?

Users who prefer a completely cable-free listening experience will find the neckband design limiting, as the physical connection between earpieces reduces the freedom associated with true wireless earbuds. Audiophiles or those who demand high-resolution audio streaming will be underserved, given the absence of advanced codecs such as LDAC or aptX and the lack of spatial audio or Dolby Atmos support. Similarly, anyone who regularly works or commutes in loud environments will find the experience compromised, as there is no active noise cancellation to block out intrusive background sound.

Design:

Fit In-ear
Ingress Protection (IP) rating IPX5
water resistance Water resistant
has no wires or cables ✕
are neckband earbuds ✓
wingtips included ✕
has RGB lighting ✕
has stereo speakers ✓
has UV light ✕
Has a display ✕

The Philips TAN1150 uses an in-ear fit and follows a neckband design, meaning the two earpieces are connected by a cable that rests around the neck rather than being fully wireless. It delivers stereo audio and carries an IPX5 rating, making it water resistant and capable of handling sweat or light splashing. Wingtips are not included, and the earbuds feature no RGB lighting, UV light, or built-in display.

Sound quality:

has active noise cancellation (ANC) ✕
has passive noise reduction ✓
driver unit size 13 mm
lowest frequency 20 Hz
highest frequency 20000 Hz
supports spatial audio ✕
has Dolby Atmos ✕
has Dirac Virtuo ✕
impedance 32 Ohms
sound pressure level 115 dB/mW
has a neodymium magnet ✕

The TAN1150 uses 13 mm drivers and covers a frequency range of 20 Hz to 20,000 Hz with an impedance of 32 Ohms and a sound pressure level of 115 dB/mW. Passive noise reduction is present, helping to block out ambient sound through the physical seal of the in-ear tips, though active noise cancellation is not supported. Spatial audio, Dolby Atmos, and Dirac Virtuo are not available, and the drivers do not use a neodymium magnet.

Power:

Battery life 60 hours
charge time 1.5 hours
battery power 200 mAh
has wireless charging ✕
Has a solar power battery ✕
has a battery level indicator ✓
has a rechargeable battery ✓

The TAN1150 is equipped with a rechargeable 200 mAh battery that delivers up to 60 hours of battery life, with a full charge taking 1.5 hours. A battery level indicator is included so users can monitor remaining charge at a glance. Wireless charging and solar charging are not supported.

Connectivity:

has fast pairing ✕
Has USB Type-C ✓
Bluetooth version 5.3
has LDAC ✕
has LDHC ✕
has Bluetooth LE Audio ✕
has aptX Adaptive ✕
has aptX Low Latency ✕
has aptX HD ✕
has aptX ✕
has aptX Lossless ✕
has aptX Voice ✕
has Auracast ✕
maximum Bluetooth range 10 m
supports Bluetooth pairing using NFC ✕
Can be used wirelessly ✓
has AAC ✓

The TAN1150 connects wirelessly via Bluetooth 5.3 with a maximum range of 10 meters, and supports the AAC codec for audio transmission. Charging is handled through a USB Type-C port, while NFC pairing and fast pairing are not available. On the codec side, LDAC, LDHC, aptX and all its variants, as well as Bluetooth LE Audio and Auracast are absent from this model.

Features:

has ambient sound mode ✕
has in/on-ear detection ✕
Supports fast charging ✓
multipoint count 2
can read notifications ✕
has a mute function ✓
can be used as a headset ✓
control panel placed on a device ✓
Has voice prompts ✓
travel bag is included ✕
Has an in-line control panel ✕
Has a temperature sensor ✕
Has a built-in camera remote control function ✕

The TAN1150 supports multipoint connectivity for up to two devices simultaneously and can be used as a headset, with a mute function and voice prompts included for hands-free convenience. Fast charging is supported, and controls are handled through a panel placed on the device itself rather than an in-line control on the cable. Ambient sound mode, in/on-ear detection, notification reading, a temperature sensor, and a camera remote function are not available, and no travel bag is included in the package.

Microphone:

number of microphones 1
has a noise-canceling microphone ✓

The TAN1150 features a single noise-canceling microphone, designed to reduce background noise during calls and voice interactions.

Final Verdict

The Philips TAN1150 is a neckband wireless earbud that makes a clear case for itself through sheer endurance — its 60-hour battery life paired with fast charging support puts it firmly in the camp of low-maintenance, everyday-use devices. The IPX5 rating, noise-canceling microphone, and dual-device multipoint pairing round out a practical feature set that serves commuters, remote workers, and casual listeners well. That said, the neckband form factor, absence of active noise cancellation, and limited codec support mean it will not satisfy users chasing a fully wireless experience or higher audio fidelity. For those whose priorities center on longevity and reliability over the course of a full day, the TAN1150 delivers a straightforward and dependable package.

Popular Comparisons

Philips TAN1150
Philips TAN1150
VS
Mivi DuoPods i2
Mivi DuoPods i2