TurboVS
PNY GeForce RTX 4070 Ti Super Verto OC Triple Fan specifications and in-depth review

PNY GeForce RTX 4070 Ti Super Verto OC Triple Fan

Manufacturer: PNY

The PNY GeForce RTX 4070 Ti Super Verto OC Triple Fan is a graphics card based on NVIDIA's Ada Lovelace architecture, manufactured on a 5 nm process and housing 45,900 million transistors. It operates with a base GPU clock of 2340 MHz and a boosted frequency of 2625 MHz, while its triple-fan cooling solution manages a 285W Thermal Design Power within a footprint measuring 305.1 mm in length and 119.4 mm in height. RGB lighting is included, and the card supports up to four simultaneous displays.

On the memory side, the card carries 16GB of GDDR6X across a 256-bit bus, reaching an effective speed of 21,000 MHz and a peak bandwidth of 672 GB/s. Its 8,448 shading units, 264 texture mapping units, and 96 render output units contribute to a texture rate of 693 GTexels/s and floating-point performance of 44.35 TFLOPS. Feature support spans DirectX 12 Ultimate, OpenGL 4.6, OpenCL 3, ray tracing, DLSS, stereoscopic 3D, and Intel Resizable BAR, with connectivity provided through one HDMI 2.1a port and three DisplayPort outputs over a PCIe 4.0 interface.

Pros
  • 16GB of GDDR6X VRAM with a 256-bit bus and 672 GB/s bandwidth accommodates memory-intensive workloads without running short on capacity
  • Support for ray tracing and DLSS gives the card access to two rendering techniques that can improve visual fidelity and frame output
  • Four display outputs — one HDMI 2.1a and three DisplayPort — allow flexible multi-monitor setups without requiring adapters
  • ECC memory support adds a degree of data integrity protection useful for compute or content creation tasks
  • The 5 nm fabrication process and 45,900 million transistors reflect a mature, dense chip design
  • RGB lighting is included for users who want the card's appearance to match a styled system build
Cons
  • A 285W TDP places meaningful demands on the system power supply and case airflow
  • The card lacks USB-C and DVI outputs, which limits compatibility with certain monitors or older display equipment
  • No liquid cooling option is available, leaving users entirely dependent on the triple-fan air solution for thermal management
  • At 305.1 mm in length, the card requires a case with sufficient clearance, which may not suit compact or mid-tower builds
Who is this for?

This card suits users who run demanding rendering, 3D content creation, or compute workloads that benefit from 16GB of GDDR6X VRAM and ECC memory support, as the combination provides both capacity and data integrity for sustained professional use. Gamers and creators working with ray tracing and DLSS-enabled applications will also find the hardware well-matched to those workflows. Additionally, anyone running a multi-monitor setup of up to four displays via HDMI 2.1a and three DisplayPort outputs will have the connectivity to do so without added hardware.

Who is this NOT for?

Users building in compact or small form factor cases will likely find the 305.1 mm length a practical obstacle, as the card demands substantial internal clearance. Those with systems that have limited power delivery may also struggle, since the 285W TDP requires a capable power supply and well-ventilated case to maintain stable thermals under load. Users who rely on DVI monitors or USB-C display connections will find no native support here, making the card a poor fit for setups dependent on either of those output types.

Performance:

GPU clock speed 2340 MHz
GPU turbo 2625 MHz
pixel rate 252 GPixel/s
floating-point performance 44.35 TFLOPS
texture rate 693 GTexels/s
GPU memory speed 1313 MHz
shading units 8448
texture mapping units (TMUs) 264
render output units (ROPs) 96
Has Double Precision Floating Point (DPFP) ✓

The PNY GeForce RTX 4070 Ti Super Verto OC Triple Fan runs at a base GPU clock of 2340 MHz, rising to 2625 MHz in boost mode, while GPU memory operates at 1313 MHz. Its 8,448 shading units are supported by 264 texture mapping units and 96 render output units, producing a texture rate of 693 GTexels/s and a pixel rate of 252 GPixel/s. Floating-point performance reaches 44.35 TFLOPS, and the card includes support for Double Precision Floating Point (DPFP), making it capable of handling workloads that require higher numerical accuracy alongside standard rendering tasks.

Memory:

effective memory speed 21000 MHz
maximum memory bandwidth 672 GB/s
VRAM 16GB
GDDR version GDDR6X
memory bus width 256-bit
Supports ECC memory ✓

This card is equipped with 16GB of GDDR6X VRAM running across a 256-bit memory bus, delivering an effective memory speed of 21,000 MHz and a maximum memory bandwidth of 672 GB/s. ECC memory support is also included, which helps detect and correct data errors during operation, adding a layer of reliability for workloads where data integrity is a concern.

Features:

DirectX version DirectX 12 Ultimate
OpenGL version 4.6
OpenCL version 3
Supports multi-display technology ✓
supports ray tracing ✓
Supports 3D ✓
supports DLSS ✓
has XeSS (XMX) ✕
AMD SAM / Intel Resizable BAR Intel Resizable BAR
has LHR ✕
has RGB lighting ✓
supported displays 4

The card supports DirectX 12 Ultimate, OpenGL 4.6, and OpenCL 3, covering a broad range of graphics and compute workloads. Ray tracing and DLSS are both supported, alongside stereoscopic 3D and multi-display technology with a maximum of four simultaneous displays. Intel Resizable BAR is included to allow the CPU broader access to GPU memory, while RGB lighting is present on the card itself. XeSS (XMX) and LHR are not featured on this model.

Ports:

has an HDMI output ✓
HDMI ports 1
HDMI version HDMI 2.1a
DisplayPort outputs 3
USB-C ports 0
DVI outputs 0
mini DisplayPort outputs 0

The card's output configuration consists of one HDMI 2.1a port and three DisplayPort outputs, providing a total of four display connections. There are no USB-C, DVI, or mini DisplayPort outputs on this model.

General info:

GPU architecture Ada Lovelace
Thermal Design Power (TDP) 285W
PCI Express (PCIe) version 4
semiconductor size 5 nm
number of transistors 45900 million
Has air-water cooling ✕
width 305.1 mm
height 119.4 mm

Built on the Ada Lovelace architecture and fabricated using a 5 nm process, this card integrates 45,900 million transistors and connects via a PCIe 4.0 interface. It carries a Thermal Design Power of 285W and relies solely on air cooling, with no liquid cooling option included. The card measures 305.1 mm in width and 119.4 mm in height.

Final Verdict

The PNY GeForce RTX 4070 Ti Super Verto OC Triple Fan is a well-specified graphics card that brings together a dense Ada Lovelace chip, 16GB of GDDR6X VRAM with 672 GB/s of bandwidth, and a broad feature set including ray tracing, DLSS, and ECC memory support — making it a capable option for both graphically intensive workloads and compute-oriented tasks. Its connectivity covers up to four displays, and the 5 nm fabrication reflects a mature underlying design. That said, the 285W power requirement and 305.1 mm length mean it is best suited to spacious, well-equipped systems, and users with older display standards or compact builds should factor in those constraints. Taken as a whole, this card represents a solid fit for users who need substantial VRAM headroom and broad API support in a triple-fan air-cooled package.