TurboVS
PowerColor Reaper Radeon RX 9070 GRE specifications and in-depth review

PowerColor Reaper Radeon RX 9070 GRE

Manufacturer: PowerColor

The PowerColor Reaper Radeon RX 9070 GRE is a graphics card based on AMD's RDNA 4.0 architecture, manufactured on a 4 nm process with 53,900 million transistors. It ships with 12GB of GDDR6 video memory across a 192-bit bus, reaching an effective memory speed of 18,000 MHz and delivering up to 432 GB/s of bandwidth. The card supports ray tracing, AMD SAM, and multi-display setups of up to four screens, with RGB lighting included on the cooler shroud.

On the performance side, the PowerColor Reaper RX 9070 GRE operates at a base GPU clock of 1,420 MHz with a boost of 2,790 MHz, translating to 34.28 TFLOPS of floating-point throughput and a texture rate of 535.7 GTexels/s. Its 3,072 shading units are paired with 192 TMUs and 96 ROPs, with a TDP of 220W. Connectivity is handled through one HDMI 2.1b port and three DisplayPort outputs, and the card connects via PCIe 5.0 with a reported width of 304 mm and height of 127 mm.

Pros
  • Supports ray tracing, DirectX 12 Ultimate, OpenGL 4.6, and OpenCL 2.2, covering a wide range of modern graphics and compute workloads
  • ECC memory support adds a layer of data integrity useful in compute-oriented tasks
  • Can drive up to four displays simultaneously, offering flexibility for multi-monitor setups
  • Three DisplayPort outputs alongside an HDMI 2.1b port provide varied connectivity options for different display configurations
  • AMD SAM is included, allowing the CPU to access the full 12GB VRAM pool more efficiently
  • RGB lighting is present on the card for those who want visual customization within their build
Cons
  • DLSS and XeSS (XMX) are not supported, limiting upscaling options to AMD's own ecosystem
  • No USB-C output is available on this card
  • At 304 mm in length, the card requires careful consideration of case compatibility before installation
  • Cooling is air-only with no water-cooling option, which may be a constraint in thermally limited or compact builds
  • The 192-bit memory bus is narrower than what some cards in this segment offer, which caps maximum memory bandwidth at 432 GB/s
Who is this for?

This card is well-suited to users who want to run modern titles with ray tracing enabled, given its support for DirectX 12 Ultimate and the compute headroom provided by 34.28 TFLOPS and 3,072 shading units. The 12GB of GDDR6 VRAM also makes it a reasonable fit for content creators and compute workloads that benefit from ECC memory support and OpenCL 2.2 compatibility. Those running multi-monitor setups of up to four displays will find the combination of three DisplayPort outputs and one HDMI 2.1b port practical for both productivity and gaming environments.

Who is this NOT for?

Users who rely on DLSS or XeSS-based upscaling — particularly those in ecosystems built around those technologies — will find this card incompatible, as neither is supported. The card's 220W TDP and air-only cooling mean it is not well-suited to small form factor or thermally constrained builds where heat dissipation is a concern. Additionally, the absence of a USB-C output makes it a poor fit for users who need to connect USB-C or Thunderbolt-compatible displays directly from their graphics card.

Performance:

GPU clock speed 1420 MHz
GPU turbo 2790 MHz
pixel rate 267.8 GPixel/s
floating-point performance 34.28 TFLOPS
texture rate 535.7 GTexels/s
GPU memory speed 2250 MHz
shading units 3072
texture mapping units (TMUs) 192
render output units (ROPs) 96
Has Double Precision Floating Point (DPFP) ✓

The PowerColor Reaper Radeon RX 9070 GRE runs at a base GPU clock of 1,420 MHz, boosting up to 2,790 MHz under load, while its 3,072 shading units are supported by 192 texture mapping units and 96 render output units. This configuration yields a texture rate of 535.7 GTexels/s, a pixel rate of 267.8 GPixel/s, and 34.28 TFLOPS of floating-point performance, with a GPU memory speed of 2,250 MHz contributing to overall throughput. The card also supports Double Precision Floating Point (DPFP), broadening its suitability for compute-oriented workloads alongside standard graphics tasks.

Memory:

effective memory speed 18000 MHz
maximum memory bandwidth 432 GB/s
VRAM 12GB
GDDR version GDDR6
memory bus width 192-bit
Supports ECC memory ✓

The card is equipped with 12GB of GDDR6 VRAM running across a 192-bit memory bus, reaching an effective memory speed of 18,000 MHz and a maximum memory bandwidth of 432 GB/s. ECC memory support is also included, which helps detect and correct memory errors — a useful capability for workloads where data integrity is a priority.

Features:

DirectX version DirectX 12 Ultimate
OpenGL version 4.6
OpenCL version 2.2
Supports multi-display technology ✓
supports ray tracing ✓
Supports 3D ✓
supports DLSS ✕
has XeSS (XMX) ✕
AMD SAM / Intel Resizable BAR AMD SAM
has LHR ✕
has RGB lighting ✓
supported displays 4

The PowerColor Reaper Radeon RX 9070 GRE supports DirectX 12 Ultimate, OpenGL 4.6, and OpenCL 2.2, covering a broad range of graphics and compute APIs. Ray tracing and stereoscopic 3D are both supported, and the card can drive up to four displays simultaneously through its multi-display technology. AMD SAM is included to help the CPU access the full VRAM pool more efficiently, while RGB lighting is present on the card itself. DLSS and XeSS (XMX) are not supported, and the card does not carry LHR restrictions.

Ports:

has an HDMI output ✓
HDMI ports 1
HDMI version HDMI 2.1b
DisplayPort outputs 3
USB-C ports 0
DVI outputs 0
mini DisplayPort outputs 0

The card's output configuration consists of one HDMI 2.1b port and three DisplayPort outputs, allowing for flexible multi-monitor arrangements. There are no USB-C, DVI, or mini DisplayPort outputs on this model.

General info:

GPU architecture RDNA 4.0
Thermal Design Power (TDP) 220W
PCI Express (PCIe) version 5
semiconductor size 4 nm
number of transistors 53900 million
Has air-water cooling ✕
width 304 mm
height 127 mm

The PowerColor Reaper Radeon RX 9070 GRE is built on AMD's RDNA 4.0 architecture, using a 4 nm manufacturing process that integrates 53,900 million transistors into the die. It connects via PCIe 5.0 and carries a TDP of 220W, with cooling handled entirely by air — there is no water-cooling option on this model. The card measures 304 mm in width and 127 mm in height, figures worth considering when checking chassis compatibility.

Final Verdict

The PowerColor Reaper Radeon RX 9070 GRE is a capable graphics card built around AMD's RDNA 4.0 architecture, bringing together a solid set of specifications for users focused on modern gaming and compute tasks. Its support for ray tracing, DirectX 12 Ultimate, ECC memory, and a four-display output configuration gives it genuine versatility, while 34.28 TFLOPS of floating-point performance backed by 12GB of GDDR6 VRAM positions it well for demanding workloads. Those aware of its limitations — particularly the lack of DLSS and XeSS support, air-only cooling, and the absence of USB-C connectivity — will be best placed to judge whether it fits their specific setup. For users within AMD's ecosystem who need a feature-complete card without water-cooling complexity, the Reaper RX 9070 GRE makes a coherent and well-rounded choice.