QCY AilyBuds Pro Plus

Manufacturer: QCY

The QCY AilyBuds Pro Plus are true wireless earbuds designed for everyday use, combining a lightweight 8-gram build with a solid feature set that covers the core needs of most listeners. Each earbud sits securely in the ear without neckband or wingtip attachments, and the pairing includes a carrying case that also doubles as a charging solution. Active noise cancellation is built in, allowing users to reduce background sound during commutes or work sessions, while an ambient sound mode lets outside audio pass through when situational awareness matters.

On the technical side, the AilyBuds Pro Plus use a 13 mm driver unit with a frequency range spanning 20 Hz to 20,000 Hz, and connectivity runs over Bluetooth 5.3 with LDAC codec support for higher-quality wireless audio transmission. Battery life reaches five hours per charge on the earbuds themselves, with the 350 mAh charging case extending total playback to around 23 hours; ANC use reduces earbud runtime to four hours. The case charges via USB Type-C, and fast charging is supported. Six microphones handle call and voice input with noise cancellation applied, the maximum Bluetooth range is 10 meters, and multipoint connectivity allows simultaneous pairing with two devices. Audio latency is rated at 80 ms.

Pros

Supports LDAC codec for higher-quality wireless audio transmission
Six-microphone array with noise cancellation improves call clarity in noisy environments
Multipoint connectivity allows simultaneous pairing with two devices
Ambient sound mode lets users stay aware of their surroundings without removing the earbuds
Fast charging is supported, reducing downtime between uses
A travel bag is included, adding practical portability out of the box

Cons

No wireless charging support for the charging case
In-ear detection is absent, meaning music does not pause automatically when an earbud is removed
Bluetooth range is limited to 10 meters
AAC codec is not supported, limiting compatibility with certain high-quality audio streams on some devices
No find-device feature, making it harder to locate misplaced earbuds

Who is this for?

The AilyBuds Pro Plus are well-suited to users who commute regularly or work in noisy environments, as the active noise cancellation and six-microphone setup with noise-canceling input handle both focused listening and clear call quality effectively. The IPX5 sweat resistance and lightweight 8-gram build make them a reasonable fit for fitness and active daily use, while LDAC support appeals to listeners who prioritize higher-quality wireless audio on compatible devices. The inclusion of multipoint connectivity also makes them practical for anyone who frequently switches between two paired devices throughout the day.

Who is this NOT for?

Users who need to locate misplaced earbuds or want automatic playback control will find the absence of a find-device feature and in-ear detection limiting. Those who rely on wireless charging for convenience will need to manage cable charging exclusively, as that option is not available. Listeners who depend on AAC or any aptX variant for audio delivery — whether for codec compatibility with specific devices or latency-sensitive tasks like mobile gaming — will find the codec support insufficient, as only LDAC is offered outside of the standard SBC baseline.

Design:

Fit	Earbud
Ingress Protection (IP) rating	IPX5
water resistance	Sweat resistant
weight	8 g
has no wires or cables	✓
are neckband earbuds	✕
wingtips included	✕
has stereo speakers	✓

The QCY AilyBuds Pro Plus follow a standard earbud fit without neckband or wingtip attachments, keeping the design minimal and self-contained. Each unit weighs just 8 grams, and the setup is fully wireless with no cables connecting the two earbuds. Stereo speakers are present in both units. For durability in active use, the earbuds carry an IPX5 ingress protection rating, making them resistant to sweat during workouts or daily wear.

Sound quality:

has active noise cancellation (ANC)	✓
has passive noise reduction	✕
driver unit size	13 mm
lowest frequency	20 Hz
highest frequency	20000 Hz
has a neodymium magnet	✕

The AilyBuds Pro Plus use a 13 mm driver unit and cover a frequency range of 20 Hz to 20,000 Hz, spanning the full standard audible spectrum. Active noise cancellation is supported, giving users the ability to reduce ambient sound in noisy environments, though passive noise isolation is not a listed feature. The drivers do not use a neodymium magnet.

Power:

Battery life	5 hours
Battery life of charging case	23 hours
Battery life (ANC)	4 hours
charge time	1 hours
battery power	27 mAh
battery power (charging case)	350mAh
has wireless charging	✕
has a battery level indicator	✓
has a rechargeable battery	✓

Each earbud holds a 27 mAh rechargeable battery that delivers up to 5 hours of playback, which drops to 4 hours when active noise cancellation is in use. The 350 mAh charging case extends the total battery life to 23 hours, and a full charge takes 1 hour. Wireless charging is not supported, but a battery level indicator is available to keep track of remaining charge across the earbuds and case.

Connectivity:

has fast pairing	✕
Has USB Type-C	✓
Bluetooth version	5.3
has LDAC	✓
has LDHC	✕
has aptX Adaptive	✕
has aptX Low Latency	✕
has aptX HD	✕
has aptX	✕
has aptX Lossless	✕
audio latency	80 ms
has aptX Voice	✕
maximum Bluetooth range	10 m
supports Bluetooth pairing using NFC	✕
Can be used wirelessly	✓
has AAC	✕

The AilyBuds Pro Plus connect wirelessly over Bluetooth 5.3 with a maximum range of 10 meters and an audio latency of 80 ms. Among the supported codecs, LDAC is available for higher-resolution wireless audio transmission, while AAC, aptX, aptX HD, aptX Adaptive, aptX Low Latency, aptX Lossless, aptX Voice, and LDHC are all absent. Fast pairing and NFC-based pairing are not supported, and the case charges via USB Type-C.

Features:

has ambient sound mode	✓
has in/on-ear detection	✕
has find device feature	✕
Supports fast charging	✓
multipoint count	2
can read notifications	✕
has a mute function	✓
can be used as a headset	✓
control panel placed on a device	✓
Has voice prompts	✓
travel bag is included	✓
Has an in-line control panel	✕
Has a temperature sensor	✕

The AilyBuds Pro Plus include an ambient sound mode for letting in environmental audio, along with a mute function and voice prompts for hands-free feedback during use. They can function as a headset for calls, and controls are handled through a panel placed on the device rather than an in-line control on a cable. Multipoint connectivity supports up to two devices simultaneously, and fast charging is available. A travel bag is included in the box. In-ear detection, a find-device feature, notification readout, and a body temperature sensor are not part of the feature set.

Microphone:

number of microphones	6
has a noise-canceling microphone	✓

The AilyBuds Pro Plus are equipped with a total of 6 microphones, and noise cancellation is applied to the microphone input to help reduce unwanted background sound during calls and voice interactions.

Final Verdict

The QCY AilyBuds Pro Plus present a well-rounded set of specifications for users who want a capable daily wireless earbud with meaningful noise management and solid audio transmission. LDAC support paired with active noise cancellation gives the earbuds a clear functional identity — they are built for listeners who care about audio quality and want relief from ambient noise during commutes or work. The six-microphone array and multipoint connectivity round out the practical side of the package, making them versatile enough for both media consumption and regular call use. Where the earbuds fall short — notably the absence of in-ear detection, wireless charging, and broader codec support — reflects genuine trade-offs rather than oversights, and users whose needs align with what these earbuds actually offer will find the specification set coherent and purposeful.