Realme P3 Pro 5G

The Realme P3 Pro 5G has a non-folding, standard-form design measuring 163.5 mm tall, 77.3 mm wide, and 8.3 mm thick, with a total volume of approximately 104.9 cm³ and a weight of 190 g. A standout aspect of its build is the IP68 ingress protection rating, which classifies it as fully waterproof — offering meaningful protection against water exposure in everyday use. Despite this level of water resistance, it does not feature a rugged construction in the traditional sense, meaning it lacks the reinforced build typically associated with purpose-built rugged devices.

The Realme P3 Pro 5G features a 6.83″ OLED/AMOLED touchscreen with a resolution of 1272 x 2800 pixels and a pixel density of 390 ppi, producing a detailed and sharp image across its large panel. The display runs at a 120Hz refresh rate with a typical brightness of 600 nits, contributing to fluid on-screen motion and reasonable visibility in moderately lit conditions. It does not support HDR10, HDR10+, or Dolby Vision, and there is no Always-On Display mode or secondary screen. The panel also lacks branded damage-resistant glass coverage.

The Realme P3 Pro 5G is powered by the Qualcomm Snapdragon 7s Gen 3, a 4 nm octa-core SoC with 8 threads configured at 1 x 2.5 GHz, 3 x 2.4 GHz, and 4 x 1.8 GHz, with a turbo clock of 2.4 GHz and a thermal design power of 5W. It is paired with 12 GB of LPDDR5 RAM running at 3200 MHz — with a maximum supported memory amount of 16 GB — and 256 GB of internal storage. Graphics are handled by the integrated Adreno 710 GPU clocked at 1050 MHz, supporting DirectX 12, OpenGL 3.2, OpenGL ES 3.2, and OpenCL 2, with 128 shading units and a maximum memory bandwidth of 25.6 GB/s. The chipset supports big.LITTLE architecture, HMP, multithreading, TrustZone security, integrated LTE, and 64-bit processing. Benchmark results place the device at 801,000 on AnTuTu, 3239 multi-core and 1162 single-core on Geekbench 6, and 3242 multi-core and 893 single-core on Geekbench 5.

The Realme P3 Pro 5G uses a dual-lens rear camera setup with a 50 MP primary sensor at f/1.8 and a 2 MP secondary lens at f/2.4, capable of recording 4K video at 30 fps with optical image stabilization and continuous autofocus during recording. Autofocus on the main camera relies on phase-detection and touch AF, while laser autofocus is not present. The rear camera supports a broad manual control set including exposure, ISO, focus, and white balance, along with HDR mode, burst shooting, slow-motion video, timelapse, and in-camera panorama — though it does not shoot in RAW format, lacks manual shutter speed control, and has no optical zoom. Flash is available on the rear, but the unit is a standard LED rather than dual-tone or RGB. HDR10 and Dolby Vision recording are not supported. On the front, a single 16 MP camera sits at f/2.4 — it is not embedded under the display, does not have a dedicated flash, and is a single-lens unit rather than a multi-lens configuration.

The Realme P3 Pro 5G runs Android 15 and includes a wide range of software features covering privacy, customization, and usability. On the privacy side, it offers clipboard warnings, location privacy options, camera and microphone access controls, and the ability to block app tracking, though Mail Privacy Protection and cross-site tracking blocking are not present. The interface supports dark mode, dynamic theming, theme customization, widgets, and an extra dim mode, while productivity is aided by split-screen multitasking, Picture-in-Picture, full-page screenshots, a media picker, sharing intents, and the ability to play games while they download. On-device machine learning is supported alongside offline voice recognition, voice commands, Live Text, customizable notifications, notification permission controls, a child lock, multi-user support, app offloading, battery health check, and device position tracking. Wi-Fi password sharing, focus modes, Quick Start, and the ability to function as a PC are not available, and the device does not receive direct OS updates from the vendor.

The Realme P3 Pro 5G is equipped with a 6000 mAh rechargeable, non-removable battery that supports 80W wired fast charging. A battery level indicator is present, making it straightforward to monitor charge status at a glance. Wireless charging is not supported, so the device relies solely on wired connections for replenishment.

The Realme P3 Pro 5G includes stereo speakers but omits a 3.5 mm headphone jack, meaning wired audio accessories require an adapter or a USB-C connection. The device does not support LDAC or aptX Lossless for high-quality wireless audio transmission, and there is no built-in radio tuner.

The Realme P3 Pro 5G supports 5G connectivity with a maximum download speed of 2900 Mbits/s and accommodates two SIM cards alongside a cellular module. Wi-Fi coverage spans Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), and Wi-Fi 6 (802.11ax), while Bluetooth 5.2 handles short-range wireless communication. The device connects via USB Type-C with USB 2.0, but lacks NFC, HDMI output, and an external memory slot. Biometric security is handled by a fingerprint scanner, though 3D facial recognition and an iris scanner are absent. Sensors on board include a gyroscope, accelerometer, compass, and GPS with Galileo support, while a barometer, infrared sensor, heart rate monitor, and motion or optical tracking are not present. Additional features such as satellite SOS, crash detection, ANT+, DLNA certification, a stylus, and a built-in projector are also not included.

The Realme P3 Pro 5G includes a video light, which can be used to illuminate subjects during video recording. The display is flat rather than curved and uses neither sapphire glass nor an e-paper panel.