Samsung ViewFinity S8 (S80UD) 37" specifications and in-depth review

Samsung ViewFinity S8 (S80UD) 37"

Manufacturer: Samsung

The Samsung ViewFinity S8 (S80UD) is a 37-inch monitor built around a VA LCD panel with LED backlighting, targeting users who need a large, high-resolution display for professional or general desktop use. Its 3840 x 2160 resolution delivers a pixel density of 119 ppi across the 37-inch panel, and the glossy screen surface contributes to color vibrancy in controlled lighting environments. The stand supports tilt, swivel, and portrait mode, while VESA mount compatibility adds flexibility for alternative mounting setups.

Color performance is anchored by 100% sRGB coverage alongside a 3000:1 contrast ratio and a typical brightness of 350 nits, with support for color calibration and a 1.07 billion color display. Connectivity includes one HDMI 2.0 port, one DisplayPort 1.2 output, four USB 3.0 ports, a 3.5 mm audio jack, and a built-in Ethernet port. The panel operates at a 60Hz refresh rate with a 5ms response time, and there is no adaptive sync support. Power draw sits at 37W during operation, with a standby consumption of 0.5W and an annual energy use of 54 kWh, carrying an EU energy label of F.

Pros
  • Full 100% sRGB color coverage combined with support for color calibration makes it well-suited for color-accurate work
  • The stand supports tilt, swivel, and portrait mode, offering meaningful ergonomic flexibility for different working positions
  • VESA mount compatibility allows the monitor to be used with third-party arms or wall mounts
  • Four USB 3.0 ports and a built-in Ethernet port add practical connectivity options without requiring additional hardware
  • Wide 178-degree viewing angles both horizontally and vertically ensure consistent image quality from off-center positions
  • Picture-in-Picture support allows content from multiple sources to be viewed on screen at the same time
Cons
  • The glossy panel with no anti-glare coating can cause noticeable reflections in bright or naturally lit environments
  • Refresh rate is limited to 60Hz with no adaptive synchronization support, which restricts use in motion-sensitive scenarios
  • No USB Type-C or Thunderbolt connectivity limits compatibility with modern laptops and single-cable setups
  • The absence of built-in speakers means a separate audio output device is required for sound
  • The EU energy label of F indicates relatively low energy efficiency for a monitor of this type
  • A single HDMI 2.0 port and one DisplayPort 1.2 output provide limited options for connecting multiple video sources simultaneously
Who is this for?

This monitor is a reasonable fit for professionals who work with color-sensitive tasks, given its 100% sRGB coverage and built-in color calibration support. The large 37-inch panel at 4K resolution also makes it well-suited for users who need generous screen real estate for detailed work such as photo editing, document review, or multi-window productivity. The flexible stand with tilt, swivel, and portrait mode, combined with VESA mount compatibility, makes it a practical choice for users who require ergonomic adaptability or plan to integrate the display into a structured desk setup. The inclusion of Ethernet and four USB 3.0 ports further supports desktop workstation use where wired connectivity is preferred.

Who is this NOT for?

Users interested in gaming or any motion-intensive content will find this monitor lacking, as the 60Hz refresh rate and absence of adaptive synchronization are not well-matched to fast-paced visual content. The glossy panel without anti-glare coating makes it a poor choice for brightly lit or naturally illuminated rooms, where reflections can significantly interfere with visibility. Additionally, users relying on modern laptops or devices that depend on USB Type-C or Thunderbolt connectivity for single-cable video and power delivery will find no such option here, limiting compatibility with newer portable hardware.

Display:

Display type LED-backlit, LCD, VA
response time 5 ms
screen size 37"
resolution 3840 x 2160 px
pixel density 119 ppi
Adaptive synchronization None
has anti-glare coating
refresh rate 60Hz
maximum horizontal viewing angle 178º
maximum vertical viewing angle 178º
has a matte panel
has a glossy panel
has a touch screen

The display uses an LED-backlit LCD panel with a VA matrix, measuring 37 inches and delivering a 3840 x 2160 resolution at a pixel density of 119 ppi. It operates at a 60Hz refresh rate with a 5ms response time, and there is no adaptive synchronization support. The panel is glossy rather than matte and carries no anti-glare coating, which is worth noting in bright environments. Both horizontal and vertical viewing angles reach 178 degrees, providing a wide field of view from most positions. The screen does not support touch input.

General info:

Type Standard
EU energy label F
supports total tilt
Has a swivel stand
Supports VESA mount
height 486 mm
width 823 mm
thickness 41 mm
weight 8900 g
supports portrait mode
maximum operating temperature 40 °C
lowest potential operating temperature 10 °C
volume 16399.098 cm³

This is a standard-type monitor with physical dimensions of 823 mm wide, 486 mm tall, and 41 mm thick, weighing 8,900 g. The stand supports tilt, swivel, and portrait mode, offering a reasonable degree of ergonomic adjustment, and the monitor is also compatible with VESA mounting solutions for wall or arm installations. Operating temperatures range from 10 °C to 40 °C, and the unit carries an EU energy label of F.

Colors:

brightness (typical) 350 nits
supports color calibration
display colors 1070 million
contrast ratio 3000:1
sRGB coverage 100%

The monitor offers a typical brightness of 350 nits alongside a 3000:1 contrast ratio, which contributes to a solid distinction between dark and light areas of the image. It covers 100% of the sRGB color space and is capable of displaying 1.07 billion colors, making it suitable for color-sensitive work. Color calibration is also supported, allowing users to fine-tune output accuracy as needed.

Connectivity:

HDMI ports 1
supports Thunderbolt
DisplayPort outputs 1
DisplayPort version DisplayPort 1.2
has a socket for a 3.5 mm audio jack
has a DVI connector
USB ports 4
USB version 3
Has USB Type-C
HDMI version HDMI 2.0
supports Ethernet
supports Wi-Fi
has AirPlay
mini DisplayPort outputs 0
has a VGA connector

For video input, the monitor provides one HDMI 2.0 port and one DisplayPort 1.2 output, while mini DisplayPort, DVI, and VGA connectors are absent. There is no Thunderbolt or USB Type-C support. On the peripheral side, four USB 3.0 ports are available alongside a 3.5 mm audio jack. Ethernet connectivity is built in, though Wi-Fi and AirPlay are not supported.

Power:

operating power consumption 37W
standby power consumption 0.5W
annual power consumption 54 kWh

During normal operation, the monitor draws 37W, while standby power consumption drops to a modest 0.5W. Based on these figures, the estimated annual energy consumption is 54 kWh.

Features:

has PiP
has stereo speakers
has built-in smart TV
has a remote control
supports Dolby Digital
supports Dolby Digital Plus
has DTS Surround
has an ambient light sensor
has a front camera

The monitor includes Picture-in-Picture (PiP) support, allowing multiple sources to be displayed simultaneously. Beyond that, the feature set is fairly minimal — there are no stereo speakers, no built-in smart TV functionality, no remote control, and no ambient light sensor or front camera. Audio-related features such as Dolby Digital, Dolby Digital Plus, and DTS Surround are likewise absent.

Final Verdict

The Samsung ViewFinity S8 (S80UD) 37″ is a large-format desktop monitor built around a clear set of priorities: a 4K VA panel with 100% sRGB coverage and color calibration support, paired with a versatile ergonomic stand and a solid wired connectivity suite. These qualities make it a coherent choice for stationary workstation use where color accuracy and screen real estate matter. That said, its 60Hz refresh rate, lack of adaptive sync, glossy panel, and absence of USB Type-C place meaningful limits on who will get the most from it. Users who need a reliable, color-faithful display for professional desktop workflows will find it well-equipped for the task, while those with broader expectations around gaming capability or modern device compatibility may find it falls short in key areas.