TurboVS
SilverStone XE360-TR5 specifications and in-depth review

SilverStone XE360-TR5

Manufacturer: SilverStone

The SilverStone XE360-TR5 is an AIO liquid cooler built specifically for AMD TR4 and sTRX4 platforms, offering a 360mm radiator and a three-fan configuration to handle the thermal demands of high-core-count processors. It comes with thermal paste pre-applied to the water block, simplifying installation, and weighs 2,660 g in total. There is no RGB lighting or integrated display on this unit, keeping the design functionally straightforward. SilverStone backs it with a one-year warranty.

The radiator measures 394 x 120 x 28 mm, while the water block sits at 119 x 79 x 25 mm. The three ball-bearing fans spin at up to 2,800 rpm, delivering a maximum combined airflow of 87.72 CFM, and the pump reaches up to 4,000 rpm. Noise output ranges from 16 dB at its quietest to 46 dB under full load, reflecting the broad operational range the fan and pump speeds cover.

Pros
  • Pre-applied thermal paste removes the need for a separate application step, simplifying the installation process
  • Ball bearing fans tend to offer greater rotational durability and consistency compared to sleeve-based designs
  • A 360mm radiator with three fans and a maximum combined airflow of 87.72 CFM provides substantial heat dissipation surface area for demanding workloads
  • The pump reaches up to 4,000 rpm, giving the liquid loop solid circulation headroom under sustained thermal load
  • At its minimum, the unit runs at 16 dB, making it relatively quiet during light or idle operation
Cons
  • The noise level reaches 46 dB at maximum fan speed, which may be noticeable in quieter environments during heavy workloads
  • Socket compatibility is limited to TR4 and sTRX4, making this cooler unsuitable for any other CPU platform
  • At 2,660 g, the total weight is substantial and may add meaningful stress to large-socket motherboard mounting points
  • The one-year warranty period is relatively short for a liquid cooling product of this size and complexity
  • There is no RGB lighting for users who want their cooling hardware to match an illuminated build aesthetic
Who is this for?

The XE360-TR5 is well-suited to users running AMD TR4 or sTRX4 platform builds, where the large water block footprint and 360mm radiator with three fans can manage the elevated thermal output typical of high-core-count processors on those sockets. The 4,000 rpm pump ceiling and 87.72 CFM of combined airflow make it a reasonable fit for sustained workloads such as rendering, compilation, or other CPU-intensive tasks that keep the processor under load for extended periods. Users who prefer a straightforward installation without sourcing separate thermal paste will also benefit from the pre-applied compound on the water block.

Who is this NOT for?

This cooler is entirely incompatible with any socket outside of TR4 and sTRX4, ruling it out for the vast majority of mainstream desktop and HEDT builds on other platforms. Users who prioritize a quiet system at all times should also take note of the 46 dB maximum noise level, which can become audible when the fans ramp up under full load. Additionally, those who want their cooling hardware to contribute to an illuminated build aesthetic will find no RGB lighting here, as the unit is designed without any decorative lighting elements.

Cooling:

Cooling type AIO liquid
Max fan RPM 2800 rpm
Max pump RPM 4000 rpm
Max airflow 87.72 CFM
Number of fans 3

The XE360-TR5 uses an AIO liquid cooling setup with three fans that reach a maximum speed of 2,800 rpm, producing a combined maximum airflow of 87.72 CFM. The pump is rated to a maximum of 4,000 rpm, giving the liquid loop sufficient circulation capacity for sustained thermal loads.

Dimensions:

Heatsink/water block height 25 mm
Heatsink/water block width 79 mm
Heatsink/water block depth 119 mm
Radiator size 360 mm
Radiator height 28 mm
Radiator length 394 mm
Radiator width 120 mm

The 360mm radiator measures 394 x 120 x 28 mm, keeping it within the standard dimensions expected for a triple-fan AIO radiator. The water block has a footprint of 119 x 79 mm and a height of 25 mm, giving it a relatively low profile that sits close to the motherboard surface.

General info:

CPU socket TR4, sTRX4
Audible noise (min) 16 dB
Audible noise (max) 46 dB
weight 2660 g
warranty period 1 years

The XE360-TR5 is compatible with TR4 and sTRX4 sockets, targeting AMD's high-core-count desktop platforms. It weighs 2,660 g in total and operates within a noise range of 16 dB at minimum to 46 dB at maximum, reflecting the wide spread between its low-speed and full-load fan behavior. SilverStone covers the unit with a one-year warranty.

Features:

Fan bearings Ball bearings
has RGB lighting ✕
Thermal paste Pre-applied
Has a display ✕

The fans use ball bearings for longevity and consistent rotational stability. Thermal paste comes pre-applied to the water block, removing the need for a separate application step during installation. The unit does not include RGB lighting or an integrated display, reflecting a purely functional design focus.

Final Verdict

The SilverStone XE360-TR5 is a purpose-built AIO liquid cooler with a clearly defined scope: it exists to manage the thermal demands of AMD TR4 and sTRX4 platforms, and its specifications are aligned accordingly. The 360mm radiator paired with a 4,000 rpm pump and three ball-bearing fans gives it the capacity for sustained workloads on high-core-count processors, while pre-applied thermal paste keeps installation straightforward. Its limitations — narrow socket compatibility, a one-year warranty, and the absence of RGB lighting — are consistent with a product designed around function over flexibility or aesthetics. For users building or maintaining a TR4 or sTRX4 system who need a liquid cooling solution sized appropriately for that platform, the XE360-TR5 presents a focused and technically coherent option.