TurboVS
Team Group T-Force Delta RGB DDR5-6000 CL38 64GB (2x32GB) specifications and in-depth review

Team Group T-Force Delta RGB DDR5-6000 CL38 64GB (2x32GB)

Manufacturer: Team Group

The Team Group T-Force Delta RGB DDR5-6000 CL38 64GB (2x32GB) is a dual-module desktop memory kit designed for DDR5 platforms. It comes in the standard 288-pin DIMM form factor and features an integrated heatsink along with RGB lighting. Each module carries a capacity of 32GB, bringing the total kit size to 64GB, and the kit operates at 6000 MHz under its tested XMP or EXPO profile.

On the timing side, the kit runs at CL38-46-46-84 with a voltage of 1.35V, translating to a true latency of roughly 12.67 ns at its rated speed. The SPD base speed is 4800 MHz, with the 6000 MHz profile activated via Intel XMP 3.0 or AMD EXPO. The kit also indicates ECC support according to its specifications, though it does not use Samsung B-Die memory. At 46 mm tall, the modules sit within a moderate height range for a heatsink-equipped DDR5 kit.

Pros
  • Supports both Intel XMP 3.0 and AMD EXPO, making it compatible with a wide range of current-generation platforms
  • 64GB total capacity across two modules suits memory-intensive workloads and multitasking scenarios
  • RGB lighting and an integrated heatsink are included as part of the physical design
  • ECC support is indicated in the specifications, which can be relevant for error-sensitive use cases
  • The 46mm module height is moderate, leaving reasonable clearance for CPU coolers in most builds
Cons
  • CL38 timings are relatively loose for a DDR5-6000 kit, resulting in a true latency of 12.67 ns that is not among the tightest available at this speed
  • The kit does not use Samsung B-Die memory, which may matter to users who specifically seek that memory configuration
  • The base SPD speed is 4800 MHz, so the 6000 MHz rate is only achievable when XMP or EXPO is manually enabled in the system BIOS
Who is this for?

This kit is a solid fit for users building or upgrading DDR5 systems on either Intel or AMD platforms, given its native support for both Intel XMP 3.0 and AMD EXPO. The 64GB total capacity makes it particularly well-suited for memory-intensive workloads such as video editing, 3D rendering, large dataset processing, or heavy multitasking where running out of addressable memory is a genuine concern. Users who also want RGB aesthetics integrated into their build without sourcing a separate lighting solution will find the built-in RGB and heatsink design a practical convenience.

Who is this NOT for?

Users prioritizing the tightest possible latency at DDR5-6000 may find the CL38 timings less appealing, as the resulting true latency of 12.67 ns is on the looser end for this frequency class. Enthusiasts who specifically seek Samsung B-Die memory for manual overclocking or binning purposes will need to look elsewhere, as this kit does not use that chip configuration. Additionally, systems that do not support XMP or EXPO activation will be limited to the 4800 MHz SPD base speed, meaning users on older or non-XMP-capable platforms would not be able to take advantage of the 6000 MHz rated profile.

Performance:

true latency 12.67 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 38
tRAS timing 84
tRCD timing 46
tRP timing 46

This kit operates on DDR5 and runs at a tested speed of 6000 MHz, though its SPD base frequency sits at 4800 MHz, meaning the higher rate requires XMP or EXPO activation. The primary timings are set at CL38-46-46-84, covering CAS Latency, tRCD, tRP, and tRAS respectively, and at the rated speed these translate to a true latency of 12.67 ns.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 32GB
has Samsung B-Die ✕
voltage 1.35V
height 46 mm
memory size 32GB

The kit uses the standard 288-pin DIMM form factor and consists of two 32GB modules, bringing the total installed capacity to 64GB. It operates at a voltage of 1.35V and stands 46 mm tall, which is a moderate height for a heatsink-equipped module. The kit does not use Samsung B-Die memory.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✓
Has an integrated heatsink ✓
has RGB lighting ✓

The module supports both Intel XMP 3.0 and AMD EXPO, allowing the rated speed profile to be enabled on compatible platforms from either manufacturer. It includes an integrated heatsink and RGB lighting as part of its physical design. The kit also indicates support for ECC memory according to its specifications.

Benchmarks:

Final Verdict

The Team Group T-Force Delta RGB DDR5-6000 CL38 64GB (2x32GB) is a well-rounded DDR5 kit that covers the essentials for modern high-capacity builds, offering broad platform compatibility through Intel XMP 3.0 and AMD EXPO support alongside a generous 64GB total capacity that suits demanding, memory-hungry environments. The CL38 timings and absence of Samsung B-Die mean it is not positioned for users chasing peak latency figures or aggressive manual overclocking, but for those whose priority is ample memory headroom on a current-generation DDR5 platform — with RGB aesthetics included — it delivers a coherent and functional specification set. Overall, it represents a straightforward choice for mainstream DDR5 builders who value capacity and platform flexibility over tight sub-timings.