TurboVS
Team Group T-Force Delta RGB DDR5-6000 CL38 32GB (2x16GB) specifications and in-depth review

Team Group T-Force Delta RGB DDR5-6000 CL38 32GB (2x16GB)

Manufacturer: Team Group

The Team Group T-Force Delta RGB DDR5-6000 CL38 32GB (2x16GB) is a dual-module desktop memory kit built around the DDR5 standard, offering a tested operating speed of 6000 MHz with a rated true latency of 12.67 ns. It features an integrated heatsink alongside RGB lighting, and fits standard 288-pin DIMM slots with a module height of 46 mm.

Each of the two 16GB modules runs at 1.35V and ships with CAS Latency timings of CL38-46-46-84, while the SPD base speed sits at 4800 MHz. The kit carries both Intel XMP 3.0 and AMD EXPO profiles for straightforward overclocking configuration, and ECC memory support is also listed among its features. Samsung B-Die is not used in this kit.

Pros
  • Supports both Intel XMP 3.0 and AMD EXPO profiles, making it compatible with a wide range of modern platforms
  • Tested speed of 6000 MHz is well above the 4800 MHz SPD base, offering meaningful headroom over stock operation
  • RGB lighting is integrated directly into the module for users who want visual customization in their build
  • An integrated heatsink aids thermal management during operation
  • ECC memory support adds a layer of data integrity checking for compatible setups
  • 32GB total capacity across two modules suits memory-intensive workloads
Cons
  • CL38 CAS Latency is on the looser side for a 6000 MHz DDR5 kit, resulting in a true latency of 12.67 ns
  • Does not use Samsung B-Die, which some users specifically seek out for overclocking headroom
  • Module height of 46 mm may cause clearance issues with large tower CPU coolers
Who is this for?

This kit is well-suited for builders working on AMD and Intel platform builds that support XMP 3.0 or EXPO, since automatic profile loading removes the need for manual tuning. The 32GB total capacity makes it a reasonable fit for memory-demanding tasks such as content creation, video editing, or running multiple applications simultaneously. Users who prioritize RGB aesthetics in their system will also find the integrated lighting a practical inclusion without needing a separate cooler or add-on solution.

Who is this NOT for?

Users focused on achieving the lowest possible memory latency may find the CL38 timings less appealing at 6000 MHz, as the resulting true latency of 12.67 ns leaves room for tighter configurations. Those building compact systems or using large air coolers should also take note of the 46 mm module height, which could present clearance issues in space-constrained cases. Additionally, enthusiasts who specifically require Samsung B-Die for aggressive manual overclocking will need to look elsewhere, as this kit does not use that memory chip configuration.

Performance:

true latency 12.67 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 38
tRAS timing 84
tRCD timing 46
tRP timing 46

This kit operates on the DDR5 standard with a tested speed of 6000 MHz, stepping up from its SPD base frequency of 4800 MHz. The primary timings run at CL38-46-46-84, covering CAS Latency, tRCD, tRP, and tRAS respectively, which translates to a true latency of 12.67 ns at the rated operating speed.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 16GB
has Samsung B-Die ✕
voltage 1.35V
height 46 mm
memory size 16GB

The kit consists of two 16GB modules in a 288-pin DIMM form factor, totaling 32GB of capacity, and operates at a voltage of 1.35V. Each module stands 46 mm tall, and Samsung B-Die is not used in this configuration.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0, AMD EXPO
Supports ECC memory ✓
Has an integrated heatsink ✓
has RGB lighting ✓

The module includes both Intel XMP 3.0 and AMD EXPO profiles, allowing supported platforms to load the rated speed and timings automatically. An integrated heatsink is present, and RGB lighting is built into the module as well. ECC memory is also supported.

Benchmarks:

Final Verdict

The Team Group T-Force Delta RGB DDR5-6000 CL38 32GB (2x16GB) delivers a straightforward DDR5 upgrade path for users building on modern AMD or Intel platforms, with broad compatibility ensured through its dual XMP 3.0 and EXPO profile support. Its 32GB capacity and 6000 MHz tested operating speed make it a practical choice for demanding workloads, while the integrated heatsink and RGB lighting add functional and aesthetic value without requiring additional components. Where it falls short is in latency precision — CL38 timings at this speed will not satisfy those chasing the tightest possible response times — but for users whose priority is platform compatibility, capacity, and visual consistency in their build, this kit covers those bases reliably.