Trust GXT 234 Yunix specifications and in-depth review

Trust GXT 234 Yunix

Manufacturer: Trust

The Trust GXT 234 Yunix is a USB desktop microphone designed for straightforward plug-and-play use on Windows and Mac OS X systems. It comes equipped with a shock mount and pop filter straight out of the box, and its on-device control panel keeps adjustments close at hand. RGB lighting adds a visual element to the setup, while a built-in mute function gives users quick control over their audio at any moment.

On the technical side, the GXT 234 Yunix captures audio through a cardioid pickup pattern, covering a frequency range of 100 Hz to 16,000 Hz at a 48kHz sampling rate with 16-bit depth. The microphone reaches a sound pressure level of 100dB and delivers a signal-to-noise ratio of 62dB. A 3.5 mm headphone output with an impedance of 2,200 Ohms is included for direct monitoring. The unit weighs 216 g, measures 108 mm in height with a 55 x 55 mm footprint, and connects via a 1.8 m USB cable.

Pros
  • Includes both a shock mount and pop filter out of the box, reducing the need for additional accessories
  • Built-in mute function allows quick audio control without adjusting software settings
  • Compatible with both Windows and Mac OS X via a straightforward USB connection
  • On-device control panel keeps volume and settings accessible directly on the unit
  • RGB lighting adds a visual element suitable for desk setups where aesthetics matter
  • Comes with a 1.8 m cable, offering reasonable reach between the microphone and the connected device
Cons
  • Frequency response tops out at 16,000 Hz, leaving the upper range of audible sound uncovered
  • A signal-to-noise ratio of 62dB is relatively modest, meaning background noise may be more noticeable in quiet recording environments
  • Not compatible with Android or iOS devices, limiting use to desktop operating systems only
  • The 2,200 Ohm impedance on the headphone output is unusually high and may not pair well with standard consumer headphones
  • No omni, hyper-cardioid, or bidirectional pickup patterns available, restricting flexibility for different recording scenarios
  • No LED sound level indicator, which can make it harder to monitor input levels at a glance
Who is this for?

This microphone is a practical fit for Windows and Mac desktop users who want a plug-and-play USB setup without the need to source extra accessories, given that a shock mount and pop filter are already included. The cardioid pickup pattern and on-device control panel make it well suited for solo voice recording, streaming, or video calls, where capturing sound from a single direction and having quick mute access matters. Users who value a tidy, visually cohesive desk setup will also appreciate the built-in RGB lighting alongside the compact 108 mm form factor.

Who is this NOT for?

Users who need mobile recording on Android or iOS devices will find this microphone incompatible, as it only works with desktop operating systems. The frequency response ceiling of 16,000 Hz and an SNR of 62dB make it less appropriate for professional studio recording or critical audio production, where wider frequency capture and a cleaner noise floor are typically required. Additionally, the 2,200 Ohm headphone output impedance is likely to cause issues for anyone relying on this microphone for real-time headphone monitoring with standard consumer-grade headphones.

Sound quality:

Connection USB
lowest mic frequency 100 Hz
audio interface frequency rate 48kHz
sound pressure level 100dB
highest mic frequency 16000 Hz
audio interface bit rate 16-bit
Signal-to-noise ratio (SNR) 62dB

The Trust GXT 234 Yunix connects via USB and captures audio across a frequency range of 100 Hz to 16,000 Hz. Its audio interface operates at a 48kHz sampling rate with a 16-bit bit depth, providing a solid foundation for clear digital audio capture. The microphone reaches a sound pressure level of 100dB, while its signal-to-noise ratio of 62dB reflects the separation between the desired audio signal and background noise.

Features:

has cardioid pattern
has a mute function
has omni pattern
Is compatible with Android
Is compatible with iOS
Is compatible with Windows
Is compatible with Mac OS X
has hyper-cardioid pattern
has flat DSP mode
has bidirectional pattern

The Trust GXT 234 Yunix uses a cardioid pickup pattern, meaning omni, hyper-cardioid, and bidirectional patterns are not available. A mute function is built in for quick audio control. The microphone is compatible with Windows and Mac OS X, but does not support Android or iOS devices. There is no flat DSP mode included.

Headphone output:

has a socket for a 3.5 mm audio jack
impedance 2200 Ohms
Has a connector for a 6.35 mm audio jack

The Trust GXT 234 Yunix includes a 3.5 mm headphone output for direct audio monitoring, while a 6.35 mm jack connector is not available. The output carries an impedance of 2,200 Ohms, which is a relevant consideration when pairing with headphones.

Design:

shock mount included
pop filter included
control panel placed on a device
Has LED sound level indicator
cable length 1.8 m
has RGB lighting
has an integrated touchpad
volume 326.7 cm³
weight 216 g
height 108 mm
thickness 55 mm
width 55 mm

The Trust GXT 234 Yunix comes with a shock mount and pop filter included, and features an on-device control panel for direct adjustments. RGB lighting is present, though there is no LED sound level indicator and no integrated touchpad. The microphone measures 108 mm in height with a width and thickness of 55 mm each, giving it a volume of 326.7 cm³, and it weighs 216 g. It connects via a 1.8 m cable.

Final Verdict

The Trust GXT 234 Yunix is a straightforward USB desktop microphone that covers the essentials for solo voice use on Windows and Mac systems. Its most practical advantage lies in arriving ready to use — with a shock mount, pop filter, and on-device controls already in place — making it a reasonable choice for streamers, casual content creators, or anyone setting up a basic home recording space. That said, its technical ceiling, including a modest SNR and a frequency range that falls short of the full audible spectrum, means it is best positioned for everyday voice capture rather than demanding audio work. For users whose needs align with its design intent, the GXT 234 Yunix delivers a functional and self-contained setup without unnecessary complexity.