Anker Soundcore P31i

Name: Anker Soundcore P31i
Brand: Anker
SKU: 5135

Manufacturer: Anker

The Anker Soundcore P31i are true wireless earbuds designed for everyday use without the constraints of cables or a neckband. They carry an IP55 rating for resistance against dust and water, making them suitable for varied environments. One of their more practical standout traits is the built-in translator feature, which sets them apart from many earbuds in this category. A travel bag is included in the box, and the earbuds support multipoint connectivity, allowing simultaneous pairing with two devices at once.

On the technical side, the Soundcore P31i use an 11 mm driver unit covering a frequency range of 20 Hz to 20,000 Hz, and they support spatial audio alongside LDAC for higher-quality wireless audio transmission. Active noise cancellation is on board, with battery life rated at 10 hours standard or 8 hours with ANC enabled, backed by a charging case that extends total playback to 40 hours. The earbuds charge via USB-C with fast charging support, and audio latency is rated at 50 ms. A noise-canceling microphone, ambient sound mode, and mute function round out the feature set.

Pros

Active noise cancellation is supported alongside passive noise reduction, offering two layers of sound isolation
The charging case extends total battery life to 40 hours, making longer use between outlet visits practical
Bluetooth 6.1 with LDAC support enables higher-quality wireless audio transmission
Multipoint connectivity allows simultaneous pairing with two devices at once
A built-in translator function adds practical utility beyond standard audio playback
IP55 rating provides resistance to both dust and water splashes

Cons

Wireless charging is not supported, requiring a cable for every recharge
Maximum Bluetooth range is limited to 10 m
No aptX codec support in any variant, which may limit compatibility with certain Android devices
Wingtips are not included, which may affect stability during physical activity
ANC use reduces battery life from 10 hours down to 8 hours

Who is this for?

The Soundcore P31i is well suited to commuters and frequent travelers who benefit from active noise cancellation combined with passive noise reduction, helping to manage noisy environments like public transit or busy offices. The 40-hour total battery life from the case makes it practical for extended trips without frequent charging. Users who switch regularly between devices will appreciate multipoint pairing with two simultaneous connections, and those who travel internationally may find the built-in translator a genuinely useful addition. The IP55 rating also makes these earbuds a reasonable choice for light outdoor use or workouts in variable weather.

Who is this NOT for?

Users who prioritize the highest possible wireless audio fidelity through aptX or its variants will find these earbuds lacking, as none of those codecs are supported. The 10-meter Bluetooth range and absence of Auracast or Bluetooth LE Audio make them less appropriate for setups that require extended wireless reach or advanced multi-listener broadcasting. Additionally, since wingtips are not included, users who need a highly secure fit during intense physical activity such as running or high-impact training may find the earbuds less reliable in that context.

Design:

Fit	In-ear
Ingress Protection (IP) rating	IP55
water resistance	Water resistant
has no wires or cables	✓
are neckband earbuds	✕
wingtips included	✕
has RGB lighting	✕
has stereo speakers	✓
has UV light	✕
Has a display	✕

The Anker Soundcore P31i use an in-ear fit and are designed as true wireless earbuds, meaning there are no cables or neckband involved. They carry an IP55 rating, confirming resistance to dust ingress and water splashes. Stereo speakers are present, while features such as RGB lighting, UV light, wingtips, and a display are not included in this model.

Sound quality:

has active noise cancellation (ANC)	✓
has passive noise reduction	✓
driver unit size	11 mm
lowest frequency	20 Hz
highest frequency	20000 Hz
supports spatial audio	✓
has Dolby Atmos	✕
has Dirac Virtuo	✕
has a neodymium magnet	✕

The Soundcore P31i feature an 11 mm driver unit and cover a frequency range of 20 Hz to 20,000 Hz. Both active noise cancellation and passive noise reduction are supported, giving the earbuds two layers of sound isolation. Spatial audio is also on board, while Dolby Atmos, Dirac Virtuo, and a neodymium magnet are not part of this model's configuration.

Power:

Battery life	10 hours
Battery life of charging case	40 hours
Battery life (ANC)	8 hours
charge time	2 hours
has wireless charging	✕
Has a solar power battery	✕
has a battery level indicator	✓
has a rechargeable battery	✓

The Soundcore P31i have a rechargeable battery offering 10 hours of playback under standard conditions, which drops to 8 hours when active noise cancellation is in use. The included charging case extends the total available battery life to 40 hours, and a full charge takes 2 hours. A battery level indicator is present, while wireless charging and solar power are not supported.

Connectivity:

has fast pairing	✓
Has USB Type-C	✓
Bluetooth version	6.1
has LDAC	✓
has LDHC	✕
has Bluetooth LE Audio	✕
has aptX Adaptive	✕
has aptX Low Latency	✕
has aptX HD	✕
has aptX	✕
has aptX Lossless	✕
audio latency	50 ms
has aptX Voice	✕
has Auracast	✕
maximum Bluetooth range	10 m
supports Bluetooth pairing using NFC	✕
Can be used wirelessly	✓
has AAC	✓

The Soundcore P31i connect wirelessly via Bluetooth 6.1 with a maximum range of 10 m, and fast pairing is supported for quicker device setup. Supported audio codecs include LDAC and AAC, while aptX in all its variants — including aptX Adaptive, aptX HD, aptX Low Latency, aptX Lossless, and aptX Voice — as well as LDHC and Bluetooth LE Audio are not available. Audio latency is rated at 50 ms, and NFC pairing and Auracast are not supported. The charging case connects via USB-C.

Features:

has ambient sound mode	✓
Supports fast charging	✓
multipoint count	2
can read notifications	✕
Has a built-in translator	✓
has a mute function	✓
can be used as a headset	✓
control panel placed on a device	✓
Has voice prompts	✓
travel bag is included	✓
Has an in-line control panel	✕
Has a temperature sensor	✕
Has a built-in camera remote control function	✕

The Soundcore P31i support fast charging and can connect to up to two devices simultaneously via multipoint pairing. An ambient sound mode, mute function, and voice prompts are all included, and the earbuds can be used as a headset for calls. A notable addition is the built-in translator feature, alongside a control panel placed directly on the device. A travel bag is included in the box. In-line controls, a body temperature sensor, notification reading, and a camera remote shutter function are not part of this model.

Microphone:

has a noise-canceling microphone	✓

The Soundcore P31i are equipped with a noise-canceling microphone, which helps reduce background noise during calls and voice input.

Final Verdict

The Anker Soundcore P31i presents a well-rounded set of specifications for a true wireless earbud aimed at everyday and travel use. Its combination of active noise cancellation, IP55 durability, and a 40-hour total battery life with the charging case gives it a practical edge for users who spend significant time away from home. LDAC support and spatial audio add meaningful audio capability, while the built-in translator and multipoint pairing broaden its appeal beyond basic listening. The absence of aptX codecs and the lack of wireless charging are worth noting for more demanding users, but for commuters, travelers, and those seeking a feature-rich daily driver, the Soundcore P31i covers most of the essentials with little compromise.