TurboVS
Corsair Vengeance DDR5-6000 C36 96GB (2x48GB) specifications and in-depth review

Corsair Vengeance DDR5-6000 C36 96GB (2x48GB)

Manufacturer: Corsair

The Corsair Vengeance DDR5-6000 C36 96GB is a dual-module DDR5 memory kit offering a total capacity of 96GB across two 48GB DIMMs. Designed for systems that benefit from high-density configurations, it operates at a tested speed of 6000 MHz while maintaining a compact heatsink profile at 44mm tall, with no RGB lighting for a cleaner aesthetic.

On the technical side, the kit runs with CL36-44-44-96 timings at 1.4V, translating to a true latency of 12 ns at its rated speed. It follows the 288-pin DIMM standard, ships with Intel XMP 3.0 support for straightforward overclocking profiles, and has an SPD base speed of 4800 MHz. ECC is not supported, and the modules do not use Samsung B-Die ICs.

Pros
  • Runs at 6000 MHz tested speed with XMP 3.0 support for straightforward profile activation on compatible motherboards
  • Each module holds 48GB, making the total 96GB capacity well suited for memory-intensive workloads that require large amounts of RAM
  • True latency of 12 ns at rated speed reflects a reasonable balance between clock frequency and timing tightness
  • Integrated heatsink assists with thermal dissipation during sustained operation
  • No RGB lighting keeps the build visually clean and unobtrusive inside a case
Cons
  • CL36 primary timing is relatively loose for a kit running at 6000 MHz, which may concern users prioritizing tight latency figures
  • Does not use Samsung B-Die ICs, which can matter to users who pursue aggressive manual overclocking beyond XMP
  • ECC is not supported, ruling out use in workstation or server environments where error-correcting memory is required
  • SPD base speed is 4800 MHz, meaning the full 6000 MHz speed depends entirely on XMP activation and motherboard compatibility
Who is this for?

This kit is a strong fit for users running memory-intensive desktop workloads such as large-scale video editing, 3D rendering, or virtual machines, where the combined 96GB capacity across two modules provides substantial headroom. Systems built around platforms that support Intel XMP 3.0 will benefit from straightforward activation of the 6000 MHz profile without manual tuning. The absence of RGB lighting also makes it a practical choice for users building clean, no-frills workstations where visual aesthetics are secondary to function.

Who is this NOT for?

Users who require ECC memory for error-correcting workloads in server or professional workstation environments will find this kit unsuitable, as it does not support that capability. Enthusiasts focused on aggressive manual overclocking may also find limitations here, given that the modules do not use Samsung B-Die ICs and ship with relatively loose CL36 timings at their rated speed. Additionally, anyone relying solely on JEDEC speeds without XMP support on their motherboard will be limited to the 4800 MHz SPD base frequency, leaving the kit's rated performance out of reach.

Performance:

true latency 12 ns
memory speed (Tested Speed) 6000
memory speed (SPD) 4800 MHz
DDR memory version 5
CAS Latency (CL) 36
tRAS timing 96
tRCD timing 44
tRP timing 44

This DDR5 kit runs at a tested speed of 6000 MHz, stepping up from its SPD base frequency of 4800 MHz when the XMP profile is applied. The primary timings are set at CL36-44-44-96, covering CAS Latency, tRCD, tRP, and tRAS respectively, which at 6000 MHz translates to a true latency of 12 ns. These figures reflect the balance between clock speed and timing tightness that the kit is rated to sustain under its specified operating conditions.

General info:

form factor 288-pin DIMM
memory size (total) 2 x 48GB
has Samsung B-Die ✕
voltage 1.4V
height 44 mm
memory size 48GB

The kit uses the standard 288-pin DIMM form factor and consists of two 48GB modules for a combined total of 96GB. Each module operates at 1.4V and stands 44mm tall, making it a relatively low-profile option within the heatsink-equipped DDR5 segment. The modules do not use Samsung B-Die ICs.

Features:

Intel XMP / AMD EXPO Intel XMP 3.0
Supports ECC memory ✕
Has an integrated heatsink ✓
has RGB lighting ✕

The modules ship with Intel XMP 3.0 support, allowing compatible motherboards to load the rated speed and timing profile automatically. An integrated heatsink is included to assist with thermal management during operation. ECC memory is not supported, and the modules carry no RGB lighting, giving them a plain, understated appearance.

Benchmarks:

Final Verdict

The Corsair Vengeance DDR5-6000 C36 96GB (2x48GB) is a high-capacity DDR5 kit built around a clear purpose: delivering substantial memory headroom for demanding desktop workloads on XMP 3.0-compatible platforms. Its 96GB total capacity across two 48GB modules is the defining characteristic here, making it relevant for users whose workflows genuinely require that scale of memory. The 6000 MHz rated speed is respectable, though the CL36 timings and the absence of Samsung B-Die ICs mean it is less oriented toward overclocking enthusiasts than toward users who want reliable, plug-and-play performance at a large capacity point. Without ECC support, it remains firmly in the consumer desktop segment. For users who need that capacity floor and value a clean, heatsink-equipped build without RGB distractions, this kit delivers a coherent and well-defined package.

Popular Comparisons

Corsair Vengeance DDR5-6000 C36 96GB (2x48GB)
Corsair Vengeance DDR5-6000 C36 96GB (2x48GB)
VS
G.Skill Trident Z5 Neo RGB AMD DDR5-6000 CL28 64GB (2x32GB)
G.Skill Trident Z5 Neo RGB AMD DDR5-6000 CL28 64GB (2x32GB)
Corsair Vengeance DDR5-6000 C36 96GB (2x48GB)
Corsair Vengeance DDR5-6000 C36 96GB (2x48GB)
VS
KingBank RGB DDR5-6000 CL36 32GB (2x16GB)
KingBank RGB DDR5-6000 CL36 32GB (2x16GB)