The Fujifilm X-T30 III is a mirrorless system camera equipped with an electronic viewfinder (EVF) offering 2360k-dot resolution and 100% coverage, alongside a 3″ touchscreen with 1620k-dot resolution that can flip out for flexible shooting angles. The body measures 118.4 × 82.8 × 46.8 mm with a volume of approximately 458.8 cm³ and weighs 378 g. It includes a built-in flash as well as a hot shoe for attaching external flash units. The camera does not feature weather sealing and has no tilting viewfinder. Operating temperatures range from 0 °C to 40 °C, making it suited for standard indoor and outdoor conditions.
The camera uses an APS-C back-illuminated CMOS sensor — though not a stacked design — with a resolution of 26.1 MP and compatibility with the Fujifilm X lens mount. Autofocus is handled by a 425-point phase-detection system that supports AF tracking, touch autofocus, and manual focus. Native ISO reaches 12800, expandable to 51200, with full manual control over ISO, shutter speed, white balance, and exposure. The fastest mechanical shutter speed is 1/4000 s (0.00025 s), while the electronic shutter tops out at 1/32000 s (3.125E-5 s), and long exposures can stretch to 30 s. Continuous mechanical shooting is available at 8 fps in burst mode, and the camera supports in-camera HDR, panorama creation, and a two-stage shutter. Sensor-shift stabilization is not present, and power-on delay is rated at 0.8 s.
The Fujifilm X-T30 III records video at 4160 × 30 fps with a bitrate of 200 Mbps, and also supports a 24p cinema mode for a more filmic frame rate. Phase-detection autofocus is available during video recording, including continuous AF to keep subjects in focus throughout a shot. For audio, the camera features a built-in stereo microphone with two mic capsules as well as a dedicated microphone input via a 3.5 mm jack. Timelapse recording is supported as a further creative option.
The camera is powered by a removable, rechargeable battery rated at 1260 mAh, with a CIPA-rated battery life of 315 shots per charge. A battery level indicator is built in, allowing users to monitor remaining power during use.
The X-T30 III is driven by the X-Processor 5 and offers a solid set of connectivity options, including Wi-Fi 4 (802.11n), Bluetooth 5.2, USB Type-C, and HDMI output. It supports remote smartphone control and can shoot in RAW format, with an external memory slot for storage expansion. The camera does not include dual card slots, GPS, NFC, or first-party live streaming support, and the hot shoe is a standard rather than advanced type.