JBL Endurance Peak 4

Manufacturer: JBL

The JBL Endurance Peak 4 are true wireless earbuds designed for active use, featuring a secure in-ear fit with wingtips included and a fully cable-free design. With IP68-rated waterproofing, they are built to handle demanding conditions without compromise. The earbuds connect via Bluetooth 5.4, support fast pairing, and can be managed through an on-device control panel, making day-to-day use straightforward.

On the audio side, the Endurance Peak 4 use a 10 mm driver covering a 20 Hz to 20,000 Hz frequency range, with a sound pressure level of 108 dB/mW and 16 Ohm impedance. Active noise cancellation and passive noise isolation work alongside an ambient sound mode for flexible listening. Six microphones, including noise-canceling mic technology, support call quality and voice use. Battery life reaches 12 hours per charge — or 8 hours with ANC active — with the charging case extending total playback to 36 hours. Fast charging is supported via USB Type-C, and the earbuds also feature multipoint connectivity for pairing with up to two devices simultaneously.

Pros

IP68 waterproof rating makes them suitable for use in wet or demanding conditions
Active noise cancellation combined with passive noise reduction offers two layers of sound isolation
The charging case extends total playback to 36 hours, reducing how often you need to find a power source
Six microphones with noise-canceling support contribute to clearer voice performance during calls
Multipoint connectivity allows simultaneous connection to two devices
Fast charging is supported, and a find-device feature adds convenience for everyday use

Cons

Wireless charging is not supported, requiring a wired connection every time
No advanced audio codec support — LDAC, aptX variants, and AAC are all absent, limiting audio transmission quality
Bluetooth range is capped at 10 m, which may be restrictive in some use scenarios
Battery life drops from 12 to 8 hours when ANC is active, a noticeable reduction for longer sessions

Who is this for?

These earbuds are a strong fit for active and outdoor users who need reliable protection against water and sweat, given their IP68 waterproof rating and secure in-ear design with wingtips. The 36-hour total battery life with the charging case, combined with fast charging support, makes them well suited to those who use earbuds heavily throughout the day without frequent access to a power source. Users who regularly switch between two devices will also benefit from multipoint connectivity, and the six-microphone setup with noise-canceling support makes them a practical choice for those who take frequent calls on the go.

Who is this NOT for?

Listeners who prioritize high-fidelity audio transmission will find these earbuds limiting, as they lack support for advanced codecs such as LDAC, aptX, and AAC, which restricts audio quality over Bluetooth. The 10 m Bluetooth range may also be a drawback for users who need reliable connectivity across larger spaces. Those looking for wireless charging convenience will need to look elsewhere, and users who keep ANC running continuously may find the reduced 8-hour ANC battery life insufficient for very long sessions.

Design:

Fit	In-ear
Ingress Protection (IP) rating	IP68
water resistance	Waterproof
weight	21 g
has no wires or cables	✓
are neckband earbuds	✕
wingtips included	✓
has RGB lighting	✕
has stereo speakers	✓
has UV light	✕
Has a display	✕

The JBL Endurance Peak 4 feature an in-ear fit with wingtips included for a more secure hold, and the earbuds are fully true wireless with no cables or neckband. Weighing just 21 g, they carry an IP68 ingress protection rating, making them waterproof and suited for use in demanding environments. The design includes stereo speakers but no RGB lighting, UV light, or built-in display.

Sound quality:

has active noise cancellation (ANC)	✓
has passive noise reduction	✓
driver unit size	10 mm
lowest frequency	20 Hz
highest frequency	20000 Hz
supports spatial audio	✓
has Dolby Atmos	✕
has Dirac Virtuo	✕
impedance	16 Ohms
sound pressure level	108 dB/mW
has a neodymium magnet	✕

The JBL Endurance Peak 4 use a 10 mm driver unit and cover a frequency range of 20 Hz to 20,000 Hz, with an impedance of 16 Ohms and a sound pressure level of 108 dB/mW. Both active noise cancellation and passive noise reduction are supported, and the earbuds are also compatible with spatial audio. Dolby Atmos, Dirac Virtuo, and a neodymium magnet are not included.

Power:

Battery life	12 hours
Battery life of charging case	36 hours
Battery life (ANC)	8 hours
charge time	2 hours
has wireless charging	✕
Has a solar power battery	✕
has a battery level indicator	✓
has a rechargeable battery	✓

The JBL Endurance Peak 4 offer 12 hours of battery life per charge, which drops to 8 hours when active noise cancellation is in use, and the included charging case extends total playback to 36 hours. A full charge takes 2 hours, and the earbuds feature a battery level indicator so you can keep track of remaining power. The battery is rechargeable, though wireless charging and solar power are not supported.

Connectivity:

has fast pairing	✓
Has USB Type-C	✓
Bluetooth version	5.4
has LDAC	✕
has LDHC	✕
has Bluetooth LE Audio	✕
has aptX Adaptive	✕
has aptX Low Latency	✕
has aptX HD	✕
has aptX	✕
has aptX Lossless	✕
has aptX Voice	✕
has Auracast	✕
maximum Bluetooth range	10 m
supports Bluetooth pairing using NFC	✕
Can be used wirelessly	✓
has AAC	✕

The JBL Endurance Peak 4 connect wirelessly via Bluetooth 5.4 with a maximum range of 10 m, and fast pairing is supported for quick setup. USB Type-C is available for wired charging. The earbuds do not support advanced audio codecs such as LDAC, LDHC, AAC, or any aptX variants, and there is no Bluetooth LE Audio or Auracast functionality. NFC pairing is also not included.

Features:

has ambient sound mode	✓
has find device feature	✓
Supports fast charging	✓
multipoint count	2
can read notifications	✕
Has a built-in translator	✕
has a mute function	✓
can be used as a headset	✓
control panel placed on a device	✓
Has voice prompts	✓
travel bag is included	✓
Has an in-line control panel	✕
Has a temperature sensor	✕
Has a built-in camera remote control function	✕

The JBL Endurance Peak 4 include a range of practical features, among them ambient sound mode, a mute function, voice prompts, and an on-device control panel. Multipoint connectivity allows simultaneous pairing with up to two devices, and the earbuds can also be used as a headset for calls. Fast charging is supported, and a find-device feature is available for locating misplaced earbuds. A travel bag is included in the box. Notification readout, a built-in translator, in-line controls, a body temperature sensor, and a camera remote function are not part of the feature set.

Microphone:

number of microphones	6
has a noise-canceling microphone	✓

The JBL Endurance Peak 4 are equipped with 6 microphones and include noise-canceling microphone technology to support clearer voice capture during calls and voice use.

Final Verdict

The JBL Endurance Peak 4 present a well-rounded option in the wireless earbuds category, built around a clear focus on durability and all-day usability. The IP68 waterproof rating and secure wingtip fit make them a dependable choice for active users, while the 36-hour total battery life with the case and fast charging support address practical endurance needs effectively. The six-microphone system and multipoint connectivity add genuine utility for users who rely on their earbuds for both communication and multi-device workflows. Where the earbuds fall short is in audio codec support and wireless charging, which may leave more demanding listeners wanting more. Overall, the Endurance Peak 4 is a capable and feature-complete set of earbuds for everyday active use, provided high-resolution wireless audio is not a priority.