QCY Melobuds N50

Manufacturer: QCY

The QCY Melobuds N50 are true wireless in-ear earbuds designed for everyday use, combining a lightweight 8 g build with a straightforward feature set that covers the essentials of modern wireless audio. Each earbud sits securely in the ear without wingtips, and the accompanying charging case extends total listening time well beyond a single charge. A six-microphone array with noise-canceling microphone technology supports clearer calls and voice input, while touch controls on the earbuds handle playback, volume, and muting without reaching for a paired device.

Connectivity runs on Bluetooth 5.4 with multipoint support for up to two devices simultaneously and a quoted audio latency of 68 ms, making the earbuds usable across different source devices without re-pairing each time. Active noise cancellation is included alongside passive noise isolation, with ANC reducing battery life from the standard 6 hours down to 4 hours per charge; the 380 mAh charging case contributes an additional 22 hours of total capacity. Charging is handled over USB Type-C, and fast charging is supported. The 12 mm driver covers a stated frequency range of 20 Hz to 20,000 Hz, and an ambient sound mode allows environmental audio to pass through when needed.

Pros

Six-microphone array with noise cancellation supports clearer voice pickup during calls
Both active noise cancellation and passive noise isolation are included for dual-layer sound blocking
Multipoint connectivity allows simultaneous pairing with two devices
The 380 mAh charging case extends total battery capacity to 28 hours combined
Fast charging is supported, reducing downtime between uses
A travel bag is included in the box, adding practical storage out of the box

Cons

ANC use reduces earbud battery life from 6 hours down to 4 hours per charge
Wireless charging is not supported, requiring a wired connection every time
No in/on-ear detection means music does not pause automatically when earbuds are removed
No find-device feature available if an earbud is misplaced
AAC, LDAC, and all aptX codec variants are absent, limiting advanced audio codec options

Who is this for?

The Melobuds N50 are well suited to everyday commuters and office users who want a lightweight, cable-free listening experience with practical noise management. The combination of active noise cancellation and passive isolation makes them a reasonable choice for moderately noisy environments like public transit or open-plan workspaces. Users who frequently switch between devices will benefit from multipoint connectivity across two sources, and the six-microphone noise-canceling setup makes the earbuds functional for regular voice calls. The IPX5 rating also makes them a workable option for those who use earbuds during light exercise or in unpredictable weather.

Who is this NOT for?

Users who prioritize high-fidelity audio will find the Melobuds N50 limiting, as the absence of LDAC, AAC, and all aptX codec variants means audio transmission is restricted to standard Bluetooth quality without any high-resolution or enhanced codec support. Listeners who regularly consume spatial or immersive audio content will also be underserved, given that spatial audio, Dolby Atmos, and Dirac Virtuo are all unsupported. Additionally, those who prefer a fully wire-free charging setup will need to compromise, as wireless charging is not available and the earbuds must be recharged via a wired USB Type-C connection each time.

Design:

Fit	In-ear
Ingress Protection (IP) rating	IPX5
weight	8 g
has no wires or cables	✓
are neckband earbuds	✕
wingtips included	✕
has RGB lighting	✕
has stereo speakers	✓
has UV light	✕
Has a display	✕

The QCY Melobuds N50 follow a true wireless, in-ear design with no cables or neckband, keeping the build minimal and unencumbered. Each earbud weighs just 8 g and sits directly in the ear without wingtip attachments, while stereo speakers deliver audio to both ears independently. The earbuds carry an IPX5 ingress protection rating, meaning they can handle water jets from any direction — suitable for workouts or light rain exposure. There is no RGB lighting, no UV light, and no display on either the earbuds or the case, reflecting a straightforward, understated physical design.

Sound quality:

has active noise cancellation (ANC)	✓
has passive noise reduction	✓
driver unit size	12 mm
lowest frequency	20 Hz
highest frequency	20000 Hz
supports spatial audio	✕
has Dolby Atmos	✕
has Dirac Virtuo	✕
has a neodymium magnet	✕

The Melobuds N50 include both active noise cancellation (ANC) and passive noise reduction, giving listeners two layers of isolation from ambient sound. Audio is handled by a 12 mm driver unit covering a frequency range of 20 Hz to 20,000 Hz. The earbuds do not feature a neodymium magnet, and there is no support for spatial audio, Dolby Atmos, or Dirac Virtuo processing.

Power:

Battery life	6 hours
Battery life of charging case	22 hours
Battery life (ANC)	4 hours
charge time	1.5 hours
battery power	35 mAh
battery power (charging case)	380mAh
has wireless charging	✕
Has a solar power battery	✕
has a battery level indicator	✓
has a rechargeable battery	✓

Each earbud houses a 35 mAh rechargeable battery rated for 6 hours of playback, which drops to 4 hours when ANC is active; the 380 mAh charging case contributes an additional 22 hours, bringing the combined total to 28 hours without ANC. A full charge takes 1.5 hours, and a battery level indicator lets users monitor remaining capacity. The earbuds do not support wireless charging or solar charging, so power is replenished through a wired connection only.

Connectivity:

has fast pairing	✕
Has USB Type-C	✓
Bluetooth version	5.4
has LDAC	✕
has LDHC	✕
has Bluetooth LE Audio	✕
has aptX Adaptive	✕
has aptX Low Latency	✕
has aptX HD	✕
has aptX	✕
has aptX Lossless	✕
audio latency	68 ms
has aptX Voice	✕
has Auracast	✕
maximum Bluetooth range	10 m
supports Bluetooth pairing using NFC	✕
Can be used wirelessly	✓
has AAC	✕

The Melobuds N50 connect wirelessly via Bluetooth 5.4 with a maximum range of 10 m and a stated audio latency of 68 ms. The earbuds do not support fast pairing, NFC pairing, AAC, LDAC, LDHC, Auracast, or any variant of aptX — including aptX, aptX HD, aptX Adaptive, aptX Low Latency, aptX Lossless, and aptX Voice — and Bluetooth LE Audio is also absent. USB Type-C is present for wired charging, though it plays no role in audio transmission given the fully wireless operation.

Features:

has ambient sound mode	✓
has in/on-ear detection	✕
has find device feature	✕
Supports fast charging	✓
multipoint count	2
can read notifications	✕
has a mute function	✓
can be used as a headset	✓
control panel placed on a device	✓
Has voice prompts	✓
travel bag is included	✓
Has an in-line control panel	✕
Has a temperature sensor	✕
Has a built-in camera remote control function	✕

The Melobuds N50 support multipoint connectivity for up to two devices simultaneously and can function as a headset for calls, with a mute function available during use. An ambient sound mode lets environmental audio through when needed, and controls are handled via a panel on the earbuds themselves rather than an in-line remote. Fast charging is supported, and voice prompts provide audio feedback for various functions. A travel bag is included in the box. The earbuds do not offer in/on-ear detection, a find-device feature, notification readout, a body temperature sensor, or a camera remote shutter function.

Microphone:

number of microphones	6
has a noise-canceling microphone	✓

The Melobuds N50 feature a six-microphone array with noise-canceling microphone technology, aimed at reducing background noise during calls and voice input.

Final Verdict

The QCY Melobuds N50 present a practical set of true wireless earbuds aimed at users who want reliable daily functionality without unnecessary complexity. The six-microphone noise-canceling array paired with dual-layer ANC and passive isolation stands out as the most compelling aspect of the package, making the earbuds genuinely useful for calls and noisy environments alike. Multipoint connectivity, fast charging, and a combined 28-hour battery capacity round out a feature set that covers the essentials well. Where the earbuds fall short — particularly around codec support and the absence of wireless charging — reflects a deliberate focus on practical utility over audiophile or premium convenience features. For users whose priorities align with that profile, the Melobuds N50 deliver a coherent and capable experience; those seeking high-resolution audio transmission or immersive spatial sound will need to look elsewhere.