The Asus TUF Gaming B650E-E Wi-Fi is built around the AM5 CPU socket and is compatible with the B650 chipset, arriving in the standard ATX form factor at 305 mm × 244 mm. It accommodates a single processor and does not include an integrated CPU or onboard graphics. Wireless connectivity spans Wi-Fi 4 through Wi-Fi 6E (802.11n/ac/ax), and Bluetooth 5.3 is present, though aptX is not supported. The board carries an HDMI 2.1 output, onboard RGB lighting, and is noted as easy to overclock; however, it does not feature a dedicated BIOS reset button or a dual-BIOS setup. A 3-year warranty is included.
This board supports DDR5 memory across four slots in a dual-channel configuration, with a maximum capacity of 256 GB. Overclocked RAM speeds of up to 8000 MHz are supported, offering headroom for enthusiast memory kits. ECC memory is not supported.
The rear I/O offers a varied USB lineup, including one USB 3.2 Gen 2 Type-A port, three USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C port, and three USB 2.0 ports; there are no USB 3.2 Gen 2x2, USB 4, Thunderbolt 3, or Thunderbolt 4 ports, nor any USB 3.2 Gen 1 Type-C. For display output, an HDMI port and one DisplayPort output are provided, while DVI and VGA connectors are absent. Networking is handled by a single RJ45 port, and there are no eSATA or PS/2 ports present.
Internal connectivity is well-stocked, with three M.2 sockets and four SATA 3 connectors available for storage, while SATA 2, mSATA, and U.2 are not supported. USB expansion headers include two USB 3.2 Gen 1 ports, two USB 3.0 ports, one USB 3.2 Gen 2x2 port, and four USB 2.0 ports, all accessible through expansion. Six fan headers are present for cooling management, and there is no TPM connector on this board.
The board provides one PCIe 5.0 x16 slot and one PCIe 4.0 x16 slot for full-sized expansion cards, along with a single PCIe x1 slot for smaller add-in cards. There are no PCIe 3.0 x16, PCIe 2.0 x16, PCIe x8, or legacy PCI slots present.
The onboard audio supports 7.1-channel output and is accessible through three audio connectors. An S/PDIF Out port is not included.
The board supports RAID 0, 1, 5, and 10 configurations, covering the most common setups for performance, redundancy, and combined use cases. RAID 0+1 is not supported.