Palit GeForce RTX 5070 GamingPro-S

Name: Palit GeForce RTX 5070 GamingPro-S
Brand: Palit
SKU: 28566

Manufacturer: Palit

The Palit GeForce RTX 5070 GamingPro-S is a desktop graphics card based on NVIDIA's Blackwell architecture, manufactured on a 5 nm process with 31.1 billion transistors. It operates at a base clock of 2325 MHz and reaches a boost speed of 2512 MHz, with a TDP of 250W over a PCIe 5.0 interface. RGB lighting is included, and the card measures 331.9 mm in length and 127.1 mm in height.

On the memory side, the card is equipped with 12GB of GDDR7 running on a 192-bit bus at an effective speed of 28000 MHz, delivering up to 672 GB/s of bandwidth with ECC support. Its 6144 shading units, 192 TMUs, and 80 ROPs contribute to a texture rate of 482.3 GTexels/s and a pixel fill rate of 201 GPixel/s, with overall floating-point performance rated at 30.87 TFLOPS. Display connectivity includes one HDMI 2.1b port and three DisplayPort outputs for a total of four simultaneous displays, while software features encompass DirectX 12 Ultimate, OpenGL 4.6, OpenCL 3, ray tracing, DLSS, and Intel Resizable BAR support.

Pros

Supports up to four simultaneous displays through a combination of three DisplayPort outputs and one HDMI 2.1b port
12GB of GDDR7 VRAM running on a 192-bit bus delivers 672 GB/s of memory bandwidth, suitable for demanding rendering workloads
ECC memory support adds data integrity protection, which is useful in compute-oriented scenarios
Ray tracing and DLSS are both supported, expanding compatibility with modern rendering pipelines
Intel Resizable BAR support allows the CPU to access the full GPU frame buffer, which can improve data transfer efficiency
RGB lighting is included for users who want visual customization in their build

Cons

The 250W TDP places a notable power demand on the system, requiring adequate PSU headroom and case airflow
No USB-C display output is available, limiting compatibility with monitors or devices that rely on that connector
Air-water cooling is not supported, meaning users cannot opt for a liquid cooling configuration on this card
The 192-bit memory bus width is narrower than what some competing cards at this tier offer, which constrains maximum bandwidth scaling
At 331.9 mm in length, the card may not fit in smaller or mid-tower cases without careful clearance checks

Who is this for?

This card is well-suited to users running demanding rendering and compute workloads that benefit from 12GB of GDDR7 VRAM, high memory bandwidth, and ECC memory support. Its ray tracing and DLSS support make it a practical fit for those working with modern graphics pipelines, while the ability to drive up to four displays simultaneously appeals to multi-monitor setups used in creative or productivity-focused environments. The PCIe 5.0 interface and Intel Resizable BAR support also make it a good match for users with current-generation platform builds looking to maximize data throughput.

Who is this NOT for?

Users with compact or small-form-factor cases may find the 331.9 mm card length difficult to accommodate without significant clearance planning. Those who rely on USB-C display connectivity will find no support for it here, making the card a poor fit for setups centered around USB-C monitors or devices. Additionally, systems with limited power delivery capacity may struggle with the 250W TDP, so users with lower-rated power supplies or constrained airflow environments would face practical challenges running this card reliably.

Performance:

GPU clock speed	2325 MHz
GPU turbo	2512 MHz
pixel rate	201 GPixel/s
floating-point performance	30.87 TFLOPS
texture rate	482.3 GTexels/s
GPU memory speed	1750 MHz
shading units	6144
texture mapping units (TMUs)	192
render output units (ROPs)	80
Has Double Precision Floating Point (DPFP)	✓

The Palit GeForce RTX 5070 GamingPro-S runs at a base GPU clock of 2325 MHz, climbing to 2512 MHz in turbo mode, while its 6144 shading units are supported by 192 texture mapping units and 80 render output units. These combine to deliver a texture rate of 482.3 GTexels/s and a pixel fill rate of 201 GPixel/s, with overall floating-point performance reaching 30.87 TFLOPS. GPU memory operates at 1750 MHz, and the card includes Double Precision Floating Point support, making it capable of handling workloads that benefit from higher numerical precision.

Memory:

effective memory speed	28000 MHz
maximum memory bandwidth	672 GB/s
VRAM	12GB
GDDR version	GDDR7
memory bus width	192-bit
Supports ECC memory	✓

The card comes equipped with 12GB of GDDR7 VRAM running across a 192-bit memory bus, achieving an effective memory speed of 28000 MHz and a maximum memory bandwidth of 672 GB/s. ECC memory support is also included, adding a layer of data integrity for workloads where memory accuracy is important.

Features:

DirectX version	DirectX 12 Ultimate
OpenGL version	4.6
OpenCL version	3
Supports multi-display technology	✓
supports ray tracing	✓
Supports 3D	✓
supports DLSS	✓
has XeSS (XMX)	✕
AMD SAM / Intel Resizable BAR	Intel Resizable BAR
has LHR	✕
has RGB lighting	✓
supported displays	4

The Palit GeForce RTX 5070 GamingPro-S supports DirectX 12 Ultimate, OpenGL 4.6, and OpenCL 3, covering a broad range of graphics and compute workloads. Ray tracing and DLSS are both supported, alongside stereoscopic 3D and multi-display technology for up to four simultaneous outputs. Intel Resizable BAR is included to help optimize data transfer between the CPU and GPU, while RGB lighting is present on the card itself. XeSS (XMX) and LHR are not featured on this model.

Ports:

has an HDMI output	✓
HDMI ports	1
HDMI version	HDMI 2.1b
DisplayPort outputs	3
USB-C ports	0
DVI outputs	0
mini DisplayPort outputs	0

The card's output configuration consists of one HDMI 2.1b port and three DisplayPort outputs, providing four display connections in total. There are no USB-C, DVI, or mini DisplayPort outputs on this model.

General info:

GPU architecture	Blackwell
Thermal Design Power (TDP)	250W
PCI Express (PCIe) version	5
semiconductor size	5 nm
number of transistors	31100 million
Has air-water cooling	✕
width	331.9 mm
height	127.1 mm

Built on the Blackwell architecture and fabricated using a 5 nm process, the card integrates 31,100 million transistors and connects via a PCIe 5.0 interface. It carries a Thermal Design Power of 250W and does not include air-water cooling. Physically, the card measures 331.9 mm in width and 127.1 mm in height.

Final Verdict

The Palit GeForce RTX 5070 GamingPro-S is a capable graphics card that brings together the Blackwell architecture, DLSS and ray tracing support, and 12GB of high-bandwidth GDDR7 memory in a configuration suited to users running modern, graphics-intensive workloads across up to four displays. Its ECC memory support and Intel Resizable BAR compatibility add practical value for those pushing the card beyond standard gaming scenarios. Physical size and a 250W power requirement do impose real system demands, and the absence of USB-C output will matter to some users, so careful platform planning is advised. Overall, it represents a well-specified option within its category for users whose systems can fully accommodate its requirements.