PowerColor Reaper Radeon RX 9070 XT

Name: PowerColor Reaper Radeon RX 9070 XT
Brand: PowerColor
SKU: 7869

Manufacturer: PowerColor

The PowerColor Reaper Radeon RX 9070 XT is a graphics card based on AMD's RDNA 4.0 architecture, manufactured on a 4nm process with 53.9 billion transistors. It ships with 16GB of GDDR6 memory across a 256-bit bus, delivering a maximum memory bandwidth of 644.6 GB/s at an effective speed of 20000 MHz. The card operates within a 304W TDP envelope and measures 304mm in length, fitting within a standard full-size form factor.

On the rendering side, the RX 9070 XT carries 4096 shading units, 256 texture mapping units, and 128 ROPs, translating to a texture rate of 760.3 GTexels/s and a pixel fill rate of 380.2 GPixel/s. Floating-point performance reaches 48.66 TFLOPS, supported by a base clock of 1660 MHz and a turbo frequency of 2970 MHz. The card supports DirectX 12, OpenGL 4.6, OpenCL 2.2, ray tracing, and AMD FSR4, while connectivity spans three DisplayPort outputs and one HDMI 2.1b port, accommodating up to four displays simultaneously. AMD SAM support is included, and ECC memory is also available.

Pros

16GB of GDDR6 VRAM across a 256-bit bus provides substantial memory capacity for memory-intensive workloads
A turbo clock of 2970 MHz and 48.66 TFLOPS of floating-point performance indicate strong compute throughput
Support for up to four simultaneous displays makes it well-suited for multi-monitor setups
Ray tracing support is included, enabling hardware-accelerated rendering of lighting and shadow effects
AMD FSR4 upscaling is supported, offering a way to maintain frame output at higher resolutions
ECC memory support adds a layer of reliability for workloads sensitive to memory errors

Cons

A 304W TDP places meaningful demands on system power delivery and case airflow
DLSS and XeSS (XMX) upscaling technologies are not supported, limiting upscaling options to AMD FSR4 only
No USB-C, DVI, or mini DisplayPort outputs are available, restricting display compatibility to full-size DisplayPort and HDMI connections
Water cooling is not included or supported, leaving thermal management entirely dependent on air cooling
No RGB lighting is present for users who factor aesthetics into their build

Who is this for?

This card is well-matched to users running demanding rendering and compute workloads, where the combination of 48.66 TFLOPS, 4096 shading units, and ECC memory support provides both throughput and reliability. The 16GB GDDR6 frame buffer with 644.6 GB/s of bandwidth makes it a practical fit for high-resolution gaming and content creation tasks that place heavy pressure on video memory. Multi-monitor users will also find the four-display output and multi-display technology support directly useful, particularly in productivity-oriented desktop environments.

Who is this NOT for?

Users working in compact or thermally constrained builds may find the 304W TDP and air-only cooling challenging to accommodate without careful case selection and adequate airflow planning. The absence of DLSS and XeSS support means those specifically reliant on NVIDIA- or Intel-ecosystem upscaling pipelines will not benefit from those technologies here. Similarly, users requiring USB-C or DVI display connectivity will need to look elsewhere, as the card provides neither, which could create compatibility issues with certain monitors or capture setups.

Performance:

GPU clock speed	1660 MHz
GPU turbo	2970 MHz
pixel rate	380.2 GPixel/s
floating-point performance	48.66 TFLOPS
texture rate	760.3 GTexels/s
GPU memory speed	2518 MHz
shading units	4096
texture mapping units (TMUs)	256
render output units (ROPs)	128
Has Double Precision Floating Point (DPFP)	✓

The PowerColor Reaper Radeon RX 9070 XT operates at a base clock of 1660 MHz, climbing to a turbo frequency of 2970 MHz under load. Its 4096 shading units are complemented by 256 texture mapping units and 128 render output units, yielding a texture rate of 760.3 GTexels/s and a pixel fill rate of 380.2 GPixel/s. Floating-point performance is rated at 48.66 TFLOPS, while GPU memory runs at 2518 MHz. The card also supports Double Precision Floating Point (DPFP), broadening its suitability for compute-oriented workloads alongside graphics rendering.

Memory:

effective memory speed	20000 MHz
maximum memory bandwidth	644.6 GB/s
VRAM	16GB
GDDR version	GDDR6
memory bus width	256-bit
Supports ECC memory	✓

The card is equipped with 16GB of GDDR6 VRAM running across a 256-bit memory bus, reaching an effective memory speed of 20000 MHz and a maximum bandwidth of 644.6 GB/s. ECC memory support is also included, which helps detect and correct memory errors during operation.

Features:

DirectX version	DirectX 12
OpenGL version	4.6
OpenCL version	2.2
Supports multi-display technology	✓
supports ray tracing	✓
Supports 3D	✓
supports DLSS	✕
has FSR4	✓
has XeSS (XMX)	✕
AMD SAM / Intel Resizable BAR	AMD SAM
has LHR	✕
has RGB lighting	✕
supported displays	4

The RX 9070 XT supports DirectX 12, OpenGL 4.6, and OpenCL 2.2, covering a broad range of graphics and compute workloads. Ray tracing is supported, along with stereoscopic 3D and multi-display output for up to four screens simultaneously. AMD FSR4 is available for upscaling, while DLSS and XeSS (XMX) are not supported. The card includes AMD SAM for optimized CPU-to-GPU memory access and does not feature LHR or RGB lighting.

Ports:

has an HDMI output	✓
HDMI ports	1
HDMI version	HDMI 2.1b
DisplayPort outputs	3
USB-C ports	0
DVI outputs	0
mini DisplayPort outputs	0

The card's output configuration consists of three DisplayPort outputs and one HDMI 2.1b port, providing a total of four display connections. There are no USB-C, DVI, or mini DisplayPort outputs present on this model.

General info:

GPU architecture	RDNA 4.0
Thermal Design Power (TDP)	304W
PCI Express (PCIe) version	5
semiconductor size	4 nm
number of transistors	53900 million
Has air-water cooling	✕
width	304 mm
height	127 mm

The PowerColor Reaper Radeon RX 9070 XT is built on the RDNA 4.0 architecture, fabricated using a 4nm process with 53,900 million transistors packed into the die. It connects via PCIe 5.0 and carries a TDP of 304W, with cooling handled exclusively by air — no water cooling option is included. The card measures 304mm in width and 127mm in height, giving a clear indication of its physical footprint within a system.

Final Verdict

The PowerColor Reaper Radeon RX 9070 XT is a well-specified graphics card that brings together RDNA 4.0 architecture, a substantial 16GB GDDR6 frame buffer, and ray tracing support into a package aimed at users with genuine demands on both rendering throughput and memory capacity. Its 48.66 TFLOPS of floating-point performance, paired with a 2970 MHz turbo clock and ECC memory support, gives it a credible footing in both gaming and compute-adjacent workloads. The 304W TDP and air-only cooling do place real constraints on system compatibility, and the absence of DLSS and XeSS narrows its upscaling flexibility — factors worth weighing depending on the intended environment. Overall, the RX 9070 XT is a well-rounded option for users prioritizing raw compute throughput and memory headroom, provided their system is equipped to handle its thermal and power requirements.