Asus Prime Radeon RX 9070 XT OC Edition

Name: Asus Prime Radeon RX 9070 XT OC Edition
Brand: Asus
SKU: 2305

Manufacturer: Asus

The Asus Prime Radeon RX 9070 XT OC Edition is a desktop graphics card based on AMD's RDNA 4.0 architecture, fabricated on a 4 nm process with 53,900 million transistors. It ships with a base clock of 1660 MHz and a boost clock reaching up to 3010 MHz, backed by a TDP of 304W and PCIe 5.0 connectivity for modern platform compatibility.

On the memory side, the card carries 16GB of GDDR6 across a 256-bit bus, delivering an effective memory speed of 20,000 MHz and a peak bandwidth of 644.6 GB/s. With 4096 shading units, 256 TMUs, and 128 ROPs, it reaches a texture rate of 770.6 GTexels/s and a pixel rate of 385.3 GPixels/s. The card supports DirectX 12 Ultimate, OpenGL 4.6, ray tracing, AMD FSR4, and AMD SAM, while its output configuration includes one HDMI 2.1b port and three DisplayPort outputs, enabling connectivity for up to four displays simultaneously.

Pros

The 16GB GDDR6 frame buffer with a 256-bit bus and 644.6 GB/s of memory bandwidth provides substantial headroom for demanding rendering workloads
Support for ray tracing, DirectX 12 Ultimate, and AMD FSR4 covers a wide range of modern graphics features in a single card
With four display outputs — one HDMI 2.1b and three DisplayPort — connecting a multi-monitor setup is straightforward without adapters
ECC memory support adds a degree of data reliability useful for compute or content creation tasks
A boost clock of 3010 MHz paired with 49.32 TFLOPS of floating-point performance indicates strong throughput capacity for the hardware tier
Double Precision Floating Point support extends the card's usefulness beyond gaming into compute-oriented applications

Cons

A 304W TDP demands a well-ventilated case and a suitably rated power supply, which may constrain compatibility with compact or lower-spec builds
The card does not support DLSS or XeSS, limiting upscaling options to FSR4 alone
No USB-C output is available, which may be inconvenient for users with USB-C monitors or displays
At 312 mm in length, physical fitment may be an issue in smaller or mid-tower enclosures
Air-water hybrid cooling is absent, so thermal management relies entirely on the air-cooled solution included

Who is this for?

This card is well-suited to users running demanding rendering, 3D visualization, or compute workloads that benefit from 16GB of GDDR6 memory, wide memory bandwidth, and Double Precision Floating Point support. Gamers and creators working with ray-traced scenes or high-resolution content will find the combination of DirectX 12 Ultimate, FSR4 upscaling, and 49.32 TFLOPS of floating-point throughput a practical fit. The four-display output capability also makes it a reasonable choice for multi-monitor desktop setups where simultaneous screen connectivity is a priority.

Who is this NOT for?

Users building in compact or small-form-factor cases may find the 312 mm card length and 304W TDP difficult to accommodate, as both physical space and power delivery requirements are substantial. Those who rely on DLSS or XeSS-based upscaling workflows will find those options unavailable, since only FSR4 is supported. Similarly, users with USB-C monitors or displays as their primary output will need to look elsewhere, as the card provides no USB-C connectivity whatsoever.

Performance:

GPU clock speed	1660 MHz
GPU turbo	3010 MHz
pixel rate	385.3 GPixel/s
floating-point performance	49.32 TFLOPS
texture rate	770.6 GTexels/s
GPU memory speed	2518 MHz
shading units	4096
texture mapping units (TMUs)	256
render output units (ROPs)	128
Has Double Precision Floating Point (DPFP)	✓

The Asus Prime Radeon RX 9070 XT OC Edition operates at a base GPU clock of 1660 MHz, with a boost clock reaching 3010 MHz under load. Its 4096 shading units are paired with 256 texture mapping units and 128 render output units, producing a texture rate of 770.6 GTexels/s and a pixel rate of 385.3 GPixels/s. Floating-point performance sits at 49.32 TFLOPS, while the GPU memory runs at 2518 MHz. The card also supports Double Precision Floating Point (DPFP), broadening its suitability for compute-oriented workloads.

Memory:

effective memory speed	20000 MHz
maximum memory bandwidth	644.6 GB/s
VRAM	16GB
GDDR version	GDDR6
memory bus width	256-bit
Supports ECC memory	✓

The card is equipped with 16GB of GDDR6 VRAM running at an effective speed of 20,000 MHz across a 256-bit memory bus, yielding a maximum memory bandwidth of 644.6 GB/s. ECC memory support is also included, adding a layer of reliability for workloads where data integrity is a priority.

Features:

DirectX version	DirectX 12 Ultimate
OpenGL version	4.6
OpenCL version	2.2
Supports multi-display technology	✓
supports ray tracing	✓
Supports 3D	✓
supports DLSS	✕
has FSR4	✓
has XeSS (XMX)	✕
AMD SAM / Intel Resizable BAR	AMD SAM
has LHR	✕
has RGB lighting	✕
supported displays	4

This card supports DirectX 12 Ultimate, OpenGL 4.6, and OpenCL 2.2, covering a broad range of modern graphics and compute workloads. Ray tracing and stereoscopic 3D are both supported, and AMD FSR4 is available as an upscaling solution, while DLSS and XeSS (XMX) are not supported. Multi-display output is enabled for up to four screens simultaneously, and AMD SAM is present to help improve data throughput between the CPU and GPU. The card does not include LHR restrictions or RGB lighting.

Ports:

has an HDMI output	✓
HDMI ports	1
HDMI version	HDMI 2.1b
DisplayPort outputs	3
USB-C ports	0
DVI outputs	0
mini DisplayPort outputs	0

The card's output configuration consists of one HDMI 2.1b port and three DisplayPort outputs, offering a total of four display connections. There are no USB-C, DVI, or mini DisplayPort outputs present on this model.

General info:

GPU architecture	RDNA 4.0
Thermal Design Power (TDP)	304W
PCI Express (PCIe) version	5
semiconductor size	4 nm
number of transistors	53900 million
Has air-water cooling	✕
width	312 mm
height	130 mm

Built on the RDNA 4.0 architecture, the GPU is fabricated using a 4 nm process node and integrates 53,900 million transistors. It connects via PCIe 5.0 and carries a Thermal Design Power of 304W. The card measures 312 mm in width and 130 mm in height, and relies solely on air cooling, with no water-cooling solution included. Dimensions aside, it does not feature an air-water hybrid cooling setup.

Final Verdict

The Asus Prime Radeon RX 9070 XT OC Edition brings together a capable set of specifications for users who need serious throughput in rendering, compute, or multi-display workflows. Its 16GB GDDR6 memory backed by 644.6 GB/s of bandwidth, combined with ray tracing support, DirectX 12 Ultimate, and FSR4 upscaling, makes it a well-rounded card for workloads that push both graphical and compute demands. That said, its 304W TDP, 312 mm length, and absence of DLSS, XeSS, and USB-C outputs mean it suits a specific type of build and workflow rather than a universal audience. For users whose setup can accommodate its power and size requirements, and who work within the AMD ecosystem, this card presents a technically solid and feature-complete option.